Spray Wire
01-25-2012, 01:47 AM,
#1
Spray Wire
Hi Folks,

I have a request to source a wire for ARC and or Flame Spray, however all I have is the composition

Fe Bal Cr 10% Al 7% Mo 5% Ni 5%

Does anyone recognise this ?

I'd appreciate any help

Muchas Gracias

Kev
Reply
01-25-2012, 08:43 PM,
#2
RE: Spray Wire
That seems to be an odd composition. Most puzzling is the absence of carbon in the alloy. I did a quick search through the materials that I have readily available and can't say that there are any matches. I have occasionally run into an odd competitor here and there that manufactures a proprietary wire and convinces an engineer to specify the composition (effectively locking in the business without writing a spec that is overtly biased). I would suggest finding out more details about the service that the work piece is ultimately going into and making your own recommendation if you are sufficiently confident that you are able to. You could spend ages searching for this wire if it is a tiny manufacturer or if it isn't commercially available.
Reply
01-29-2012, 10:52 PM,
#3
RE: Spray Wire
(01-25-2012, 08:43 PM)MichiganMan Wrote: That seems to be an odd composition. Most puzzling is the absence of carbon in the alloy. I did a quick search through the materials that I have readily available and can't say that there are any matches. I have occasionally run into an odd competitor here and there that manufactures a proprietary wire and convinces an engineer to specify the composition (effectively locking in the business without writing a spec that is overtly biased). I would suggest finding out more details about the service that the work piece is ultimately going into and making your own recommendation if you are sufficiently confident that you are able to. You could spend ages searching for this wire if it is a tiny manufacturer or if it isn't commercially available.

Thanks Michigan Man,

I thought it was a very strange compsition but apparently that is what he has. I have advised some of our range but I will have to just wait and see.

Thanks again for your reply

Kev
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  Oxy-fuel wire spray gun questions hje 5 4,662 01-26-2019, 05:58 PM
Last Post: plasmajet1990
  MO wire spray parameter for 3GF kim jong hun 2 3,458 04-29-2018, 01:00 PM
Last Post: kim jong hun
  Wire Flame spray and Twin Arc spraying wtaz 1 4,569 03-30-2015, 09:41 PM
Last Post: loriolo
  Hardness with Arc Spray Wire Edson 4 6,517 11-21-2014, 11:56 PM
Last Post: loriolo
  porosity in bronze wire spray KevGarty 1 4,188 07-22-2014, 01:45 AM
Last Post: shantanu
  Reduce unmelted particles in Combustion Wire Spray Alberto Villalobos 8 9,039 05-19-2014, 07:21 PM
Last Post: KevinS
  Copper wire arc spray surface roughness operator 10 11,199 09-10-2013, 09:06 AM
Last Post: Esteban
  Bonding for Wire Flame Spray using Aluminum pure wire iwan-sedaryawan 3 6,196 12-14-2012, 08:00 PM
Last Post: MichiganMan
  Separation in Wire spray (Metco 405) shabisyed 3 7,760 03-13-2012, 08:44 AM
Last Post: loriolo
  Machining for Aluminum Bronze wire flame spray iwan-sedaryawan 3 8,459 01-12-2011, 11:47 AM
Last Post: iwan-sedaryawan
  Dual wire arc spray systems MET-ELITE 3 8,458 05-11-2009, 12:33 PM
Last Post: Stuart Milton
  twin wire arc spraying equipment for stainless steel wire, monel wire, etc. technovel 6 13,393 08-01-2008, 11:59 AM
Last Post: adam wintle



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd