Spray Table for Air Cooled SM HVOF gun
03-30-2013, 02:05 AM,
#1
Spray Table for Air Cooled SM HVOF gun
Hi Forum members,
I'd appreciate if you can provide me the above mentioned for the following powders:
DIAMALLOY 2004,2001, 3007, 4008NS.

Thank you
S.Guna
Reply
04-03-2013, 12:53 PM,
#2
RE: Spray Table for Air Cooled SM HVOF gun
Hi Guna

What system do you have, and what gas do you use?, i can send to you the spray parameters, but you can contact your Sulzer rappresentative directly, and they will be happy to help you, and send to you all the updated spray tables and technical bulletins for the powders you usually buy from them.
If you must have some problem with sulzer rappresentative, send mi a private message with your mail address.
Best regards
Luigi
Reply
04-04-2013, 07:23 AM,
#3
RE: Spray Table for Air Cooled SM HVOF gun
Hi loriolo,
I'm using propane as fuel gas and the parameter table that is with me is limited to a few powders only.

Thank you,
Guna
Reply
04-08-2013, 10:48 AM,
#4
RE: Spray Table for Air Cooled SM HVOF gun
Hi Guna
If you only have a limited materials parameters, would be becouse you use DJ9A hardware, if you want to spray the others materials you must update your gun with DJ1050 hardware, and if you want to have more productivity and better coatings result, you must update your gun with DJ2700 ibrid hardware, i send to you the spray table to be used with DJ1050 Hardware.


Attached Files
.pdf   DJ1050Hardware_Propane.pdf (Size: 601.13 KB / Downloads: 820)
Best regards
Luigi
Reply
04-09-2013, 05:28 AM,
#5
RE: Spray Table for Air Cooled SM HVOF gun
Thank you loriolo!
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  Robot speed & RL turn table calculation demionkrishan 9 6,512 05-12-2020, 07:32 PM
Last Post: Lemster68
  coating hardness using Hipojet 2700M air cooled JRB VIRANI 10 2,253 03-08-2020, 06:41 AM
Last Post: Stephen Booth
  Water cooled vs air cooled Met.Eng. 5 1,462 12-08-2018, 04:01 PM
Last Post: vcduramais
  Powder Coating for Surface Table achmadarifudinh 3 2,074 11-28-2017, 12:19 PM
Last Post: Artyom
  Is it possible to spray powder established for gas based HVOF in Fluid HVOF system?? sreenuvundela 0 2,312 04-18-2016, 07:52 AM
Last Post: sreenuvundela
  DJ 2700 System Water cooled RV_DMG 3 3,990 03-14-2015, 05:05 AM
Last Post: Stephen Booth
  Table (PACVD cracked?) michal85waw 3 6,523 11-18-2006, 04:39 PM
Last Post: Gordon



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd