Spray & Fuse coating for Boiler tubes
05-24-2012, 06:21 AM,
#1
Spray & Fuse coating for Boiler tubes
Usually Carbide coating with HVOF & Cored wire coating with Arc spray are well known & adopted processes for Boiler tubes coating in coal based thermal power plant.

I have came to know that spray & fuse coating is also another option for this application!
What kind of boiler tubes are these?
Are these different from the one which is done with either hvof or arc spray?

Kindly share your thoughts, as we are Indian based thermal spray coating manufacturer & based on the new developments & applications worldwide we try to make it better with our resources & spread in the national market.
Reply
05-29-2012, 06:40 PM,
#2
RE: Spray & Fuse coating for Boiler tubes
Hi jaydev choudhary

I'm sure some fused self-fluxing alloys would work well in some arduous conditions. Its just the hot process side of fusing the coatings that maybe a problem.
Reply
05-31-2012, 08:01 PM,
#3
RE: Spray & Fuse coating for Boiler tubes
Hi Jaydev

Spray and fuse coatings are being used for superheater tubes. Fuse is not a problem if well organised

BR
Vitaly
Reply
06-21-2015, 03:17 PM,
#4
RE: Spray & Fuse coating for Boiler tubes
hi,

This is Abhay, we are providing spray and fuse coatings to glass mould plungers in INDIA,

i want to know about coating boiler tubes by spray and fuse process.

1)what will be the hardness of spray and fuse coating on boiler tubes?
2)what will be the other alloying elements with nicrbsi for this application?
3)if the hardness of the spray and fuse coating is 50 hrc, what kind of post coating treatment is required(considering the size of these tubes)?

50 hrc coatings crack, on atmospheric cooling due to thermal stress(i think it is thermal stress)


Reply
06-22-2015, 08:35 AM,
#5
RE: Spray & Fuse coating for Boiler tubes
(06-21-2015, 03:17 PM)abhay Wrote: hi,

This is Abhay, we are providing spray and fuse coatings to glass mould plungers in INDIA,

i want to know about coating boiler tubes by spray and fuse process.

1)what will be the hardness of spray and fuse coating on boiler tubes?
2)what will be the other alloying elements with nicrbsi for this application?
3)if the hardness of the spray and fuse coating is 50 hrc, what kind of post coating treatment is required(considering the size of these tubes)?

50 hrc coatings crack, on atmospheric cooling due to thermal stress(i think it is thermal stress)

Hi Abhay,

The coating for boiler plants (pipe walls and superheater tubes) has a single goal - corrosion protection. Unlike molds for glass pressing, the wear resistance and the amount of hardness is not necessary. For this reason, pure NiCrBSi alloys are used without carbon and carbides for boiler plants mainly. NiCrBSi layers are relatively soft and do not tend to cracking. Such layers are melted after the flame spraying at about 1050°C. There is no further heat treatment is necessary.

Regards
Reply
06-22-2015, 08:52 AM,
#6
RE: Spray & Fuse coating for Boiler tubes
THANK YOU , VADIM.

so i guess 40 hrc nicrbsi coating will be ideal for boiler tubes.

if corrosion is the only concern, can we give it a zinc (wire flame spray) coating(which is used for structural rust prevention)

it will reduce the cost i believe.
Reply
06-22-2015, 10:04 AM,
#7
RE: Spray & Fuse coating for Boiler tubes
(06-22-2015, 08:52 AM)abhay Wrote: THANK YOU , VADIM.

so i guess 40 hrc nicrbsi coating will be ideal for boiler tubes.

if corrosion is the only concern, can we give it a zinc (wire flame spray) coating(which is used for structural rust prevention)

it will reduce the cost i believe.

Hi Abhay,

Corrosion of boiler components is not the normal corrosion in water, zinc can not help in this case. The tube walls and superheater tubes may be hot up to 600°C. This corrosion is thus a high-temperature corrosion. The most corrosive agents are Chloride and HCl, they attack quickly the iron. Nickel-based alloys (NiCrBSi, Nimonic, Inconel and others) are more stable than iron against such corrosion, but not absolutely resistant.
A detailed information about boiler corrosion you can get here:

https://www.chemin.de/Publikationen/Publikationen.php

Regards
Reply
06-25-2015, 05:08 AM,
#8
RE: Spray & Fuse coating for Boiler tubes
Thank you
Vadim
Reply
05-10-2020, 08:14 PM,
#9
RE: Spray & Fuse coating for Boiler tubes
[quote='abhay' pid='9748' dateline='1434896272']
hi,

This is Abhay, we are providing spray and fuse coatings to glass mould plungers in INDIA,

i want to know about coating boiler tubes by spray and fuse process.

1)what will be the hardness of spray and fuse coating on boiler tubes?
2)what will be the other alloying elements with nicrbsi for this application?
3)if the hardness of the spray and fuse coating is 50 hrc, what kind of post coating treatment is required(considering the size of these tubes)?

50 hrc coatings crack, on atmospheric cooling due to thermal stress(i think it is thermal stress)


Hi,
My customer ask for Spray and Fuse process and preticularly Castolin RW 12112 powder which is Ni-WC blend.
So we will offer him Sentesbir Ni-WC blend powder with 60 HRC Ni matrix and FTC.
Regards,
Gökhan

Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  HVOF vs Spray and Fuse Danmarco 1 820 02-13-2020, 04:30 PM
Last Post: Gordon
  Boiler tube failure Flo24 8 13,438 06-22-2019, 01:19 PM
Last Post: velocity
  BOILER TUBE COATING ehasan 4 15,092 11-14-2017, 03:24 AM
Last Post: Stephen Booth
  coating Fluidized Bed Combustion Boiler tubes iwan-sedaryawan 9 7,471 09-18-2017, 05:01 AM
Last Post: Stephen Booth
  Coating on Boiler tube in Coal Fired Power Plan by using Tafa wire 97MXC Iwan Sedaryawan CA 4 3,725 04-21-2017, 03:17 PM
Last Post: J!m
  How to Fuse a NiCrbSi (16C) in a oven? Joris Kraak 4 4,214 04-01-2014, 05:47 AM
Last Post: Stephen Booth
  Can stellite 6 fuse ??? Met.Eng. 1 3,646 03-12-2014, 06:19 AM
Last Post: sreenuvundela
  Spray-fuse rapid "mushroom" growth NiCrSiB jasonpbond 4 5,423 03-03-2014, 12:01 PM
Last Post: Stephen Booth
  Spray and Fuse Co-base or Ni-base alloy on Inconel 718 Frank 1 2,902 09-23-2012, 01:12 PM
Last Post: Gordon
  spray & fuse question Brent 5 6,784 06-04-2012, 02:41 PM
Last Post: djewell
  HELP TO DEPOSIT SPRAY & FUSE COATING OF STELLITE POWDER --- REG sreenuvundela 10 10,491 03-14-2012, 11:46 AM
Last Post: Vijay Deshpande
  Coating of coal Boiler tube wall iwan-sedaryawan 6 7,307 05-10-2011, 07:16 AM
Last Post: A.Termika Ltd
  Refuse Incineration (Waste to energy) Boiler Coatings MichiganMan 4 6,585 09-26-2010, 05:48 AM
Last Post: Stephen Booth
  Erosion-corrosion issues in boiler applications sivakumar 1 5,084 05-04-2010, 08:40 PM
Last Post: MichiganMan
  delamination of spray - fuse coating Arturas 10 9,892 04-01-2009, 05:13 PM
Last Post: Gordon



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd