Silicon via APS at 200 gram / min and 10 mm thick
03-27-2014, 01:14 PM, (This post was last modified: 03-27-2014, 01:15 PM by Stephen Booth.)
#1
Silicon via APS at 200 gram / min and 10 mm thick
Greetings

I have a customer that request to plasma spray Silicon via APS at 200 gram / min and 10 mm thick.

and also spraying Aluminium at the same spray rates.

Question:
  1. would this be possible with standard European Twin type powder feeder?
  2. can silicon be spray this thick ?

Or would we use multiple feeders and powder ports

Going to X post to Linked IN as well



Stephen James Booth
www.ipsteknokraft.com
www.teknokraft.com
Indonesia WhatsApp +6281905603262

Reply
04-29-2014, 09:22 AM,
#2
RE: Silicon via APS at 200 gram / min and 10 mm thick
Should be the target roll in PVD

1.you may need at least one more powder feeder.
2.can not be the pure Si, must be Si with Al
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  Spraying 86-10-4 extra thick Neufeld 6 1,320 07-17-2019, 09:00 AM
Last Post: arlen.nurlan
  Silicon Powder Clogging Tom Bruce 2 1,322 02-13-2018, 11:15 AM
Last Post: adam wintle
  Silicon and Hafnium coating powder effect achmadarifudinh 1 1,467 08-23-2017, 01:39 PM
Last Post: mgbaca1
Question Preheating silicon bars for arc spraying banquo 2 3,879 03-08-2010, 11:07 AM
Last Post: banquo
  Problems with aluminium-silicon coating gasper 6 13,748 05-10-2007, 03:01 PM
Last Post: gasper



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd