Sermaloy J Diffusion Coating hair crack repair
05-14-2024, 05:57 PM,
#1
Sermaloy J Diffusion Coating hair crack repair
Hi! All, rarely I used to get hairline crack on fillet area due to high thickness. thickness requirement is 35-80 microns, sometimes when 
the operator added one extra pass to match the coating thickness, this used to be happened. As I aware this process is very complicate. 
My question here is
Is this crack can be repair before sending it to diffusion Heat treatment or after drying / curing in the Oven? 
After Heat treatment, if the thickness is less, is it possible to recoat??

Regards,
DK
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
Video Repair of base material defect after HVOF Coating Pranab_hvof 2 5,202 06-27-2022, 12:20 PM
Last Post: sushil1405
  Crack indication Stellite 1 HVOF achmadarifudinh 5 5,084 07-07-2021, 07:19 AM
Last Post: Stephen Booth
  Plunger Repair with WC coating sal 8 8,591 04-26-2016, 10:54 PM
Last Post: pakalano
  Crack on WC/Co Met.Eng. 1 4,921 07-18-2013, 12:40 AM
Last Post: Alberto Villalobos
  Chromium Carbide crack novakmichal86 4 8,603 03-01-2013, 09:04 AM
Last Post: kschewe
  Repair Ni-Cr coating vevecaz 4 7,509 12-22-2009, 08:00 AM
Last Post: k09
  Surface treatement for high-friction interface with human hair davidHMC 2 6,577 06-22-2009, 07:47 PM
Last Post: Gordon
  Crack line ykang 18 23,593 04-18-2009, 11:24 PM
Last Post: LEN WOOD
  Stripping of Diffusion Al-Si Coating on Superalloy khajeh 2 6,197 12-15-2008, 03:02 PM
Last Post: Steph
  crack in NiCr Panf 11 14,501 10-22-2008, 10:56 AM
Last Post: Panf
  crack in WC/Co Panf 8 16,939 07-14-2007, 04:58 PM
Last Post: fhyuan
  Avoiding Diffusion Welding in SS under Vac' Nick Clark 7 12,956 03-03-2007, 05:43 PM
Last Post: hapewoe



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd