Sealers
11-25-2014, 06:47 AM,
#1
Sealers
Hi All,

Does anyone have experience in using any of the "off the shelf" Sealers like a AP / SA / loctite etc in an anti-stick application over a WCCo coating?

Regards

Shantanu
Reply
11-25-2014, 10:43 AM,
#2
RE: Sealers
Assuming antistick is for dryer rolls after size press roll. Typically off the shelf is DuPont 954-303 one coat black
Reply
11-25-2014, 01:42 PM,
#3
RE: Sealers
(11-25-2014, 10:43 AM)Stephen Booth Wrote: Assuming antistick is for dryer rolls after size press roll. Typically off the shelf is DuPont 954-303 one coat black

Hi Stephen,

Not dryers, but various paper mill rolls like Lead rolls etc. working in wet environments with "sticking" as a big issue....

DuPont 954-303: Is this heat cured or air dried?

Regards

Shantanu
Reply
11-29-2014, 08:28 AM,
#4
RE: Sealers
Heat Cured

Alternatively you can look up the company called Fluron in the USA
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  High temperature sealers for food contact pcdmt 3 2,650 04-25-2019, 12:28 PM
Last Post: loriolo
  Metco Sealers JamieG 0 1,053 02-14-2019, 03:36 PM
Last Post: JamieG
  Solvent Resistant Sealers - Know of any good ones? MichiganMan 2 3,348 04-07-2011, 02:10 PM
Last Post: MichiganMan



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd