SG-100 + ext. 2700 - spraying parameters

[Jaryn]

Hello,
I need spraying parameters for this gun. Material is Ni5Al or Ni20Cr. I need parameters for argon/hydrogen plasma. Someone who can help me?
Thank you

[Artyom]

Hello Jaryn!

Please try these parameters for NiAl:
Anode - 200 (spray angle - 45 degrees, powder injection angle - 10 degrees forward)
Ar - 40 lpm
H2 - 3 lpm
Amperage - 350 A
Carrier gas (Ar) - 4 lpm
Powder hopper - 2 rpm
Power input - 22 kWt
Spraying distance - 45 mm

For NiCr you may need to slightly decrease an amperage.

Kind regards,
Artyom[/quote][/code][/php]

---

Sorry, Jaryn,

I wanted to say "NiCr you may need to slightly increase an amperage"
But be careful - do not exceed the power limit 25 kWt.

KR,
Artyom