Surface Engineering Forum › Surface Engineering › Surface Engineering Threads v
Repair of base material defect after HVOF Coating



Thread Modes
Repair of base material defect after HVOF Coating
04-07-2015, 02:42 AM,
#1
Pranab_hvof Offline
Newbie
*
 Posts: 1
Threads: 1
Joined: Apr 2015
Reputation: 0
Video  Repair of base material defect after HVOF Coating
Hi everyone..

We do HVOF coating for Valve ball & seats. Recently, one we faced an issue of surface defect of base material. A pin hole was observed during grinding operation of ball, which we could not notice after blasting/during coating.

The blow hole is very near to sealing area & will affect the performance in terms of leakage, or may result in coating pill off during hydro testing & cycling of valve.

Is there any method to seal/ repair the porosity, without having to go for stripping?

Please guide.
Email Find
Reply
06-20-2015, 06:45 PM,
#2
Johnny_Blaze Offline
Active Member
****
 Posts: 41
Threads: 3
Joined: Jun 2015
Reputation: 3
RE: Repair of base material defect after HVOF Coating
(04-07-2015, 02:42 AM)Pranab_hvof Wrote: Hi everyone..

We do HVOF coating for Valve ball & seats. Recently, one we faced an issue of surface defect of base material. A pin hole was observed during grinding operation of ball, which we could not notice after blasting/during coating.

The blow hole is very near to sealing area & will affect the performance in terms of leakage, or may result in coating pill off during hydro testing & cycling of valve.

Is there any method to seal/ repair the porosity, without having to go for stripping?

Please guide.


Hi Pranab,
Did you find an answer to this problem?

Regards,
John
Find
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  Ceramic Coating on Aluminum Base metal demionkrishan 9 2,460 02-03-2020, 09:35 AM
Last Post: DMan
  WC-CO-CR hvof coating thickness measurement on Base SS 316L JRB VIRANI 3 1,549 06-20-2019, 09:16 AM
Last Post: loriolo
  Defect Missing Material and Coating Failure achmadarifudinh 2 2,316 02-12-2018, 05:47 AM
Last Post: achmadarifudinh
  Good preparation for cast iron base material plzc126330 3 2,533 11-24-2016, 01:17 AM
Last Post: plzc126330
  Need Help selecting Correct Coating Material gsfraser 6 3,559 10-10-2016, 08:40 PM
Last Post: MVagusta
  Coating material kim jong hun 4 3,536 06-28-2016, 01:32 AM
Last Post: kim jong hun
  Plunger Repair with WC coating sal 8 5,379 04-26-2016, 10:54 PM
Last Post: pakalano
  Spray and Fuse Co-base or Ni-base alloy on Inconel 718 Frank 1 3,194 09-23-2012, 01:12 PM
Last Post: Gordon
  HVOF WCCoCr Coating defect Patrick K 5 7,079 05-25-2012, 10:08 PM
Last Post: pakalano
  Need help to suggest coating material operator 5 5,445 12-28-2011, 09:53 AM
Last Post: Guna
  Which powder can be applied on base structure A351-CF8M minh_8888 4 6,003 01-19-2011, 05:23 PM
Last Post: Gordon
  Repair Pump Shaft on Base Material Nitronic50 Piyapong 1 3,858 03-03-2010, 05:53 PM
Last Post: djewell
  Repair Ni-Cr coating vevecaz 4 5,357 12-22-2009, 08:00 AM
Last Post: k09
  Causes to Porosity Defect on Porous TBC Coating Alexangel1226 7 13,449 02-25-2008, 01:59 PM
Last Post: Gordon



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd