Reg: POT Stabilizer Rolls
04-16-2021, 07:33 AM,
Reg: POT Stabilizer Rolls
Dear Friends,

We have a received an order for POT Stabilizer Rolls from one of our customer. The drawing calls for a surface roughness of 1.6-1.8 Ra.

As this roll will be used in a Zin Pot we are supposed to apply a sealant for proper sealing of the porosity. As of now am using DICHTOL HTR0977 Sealant.

The Surface Roughness after coating ( HVOF Process ) is in the range of 4-6 Ra. But once we apply the sealant and cure it the Roughness is coming down to 0.4-0.5 Ra.

Can anyone help me out how to maintain the roughness in the range of 1.6-1.8 Ra.

Also please do let me know whether the sealant what we are using currently is the proper sealant for this application.

Do help me out in this scenario.

Thanks in advance.

Possibly Related Threads…
Thread Author Replies Views Last Post
  Ra value 1.6 to 1.7┬ÁM in CGL POT Stabilizer roll Packiaraj Mutharasu 3 1,808 02-28-2020, 08:44 AM
Last Post: Vadim Verlotski
  Sink pot rolls sealant Danmarco 4 2,525 10-14-2019, 05:56 PM
Last Post: PTSchram
  Hvof on conductor rolls for electric tin lines Danmarco 4 3,181 11-16-2016, 03:37 PM
Last Post: shantanu
  continuous casting rolls Arturas 4 6,966 11-16-2016, 09:41 AM
Last Post: arlen.nurlan
  Tinning mill rolls shantanu 1 2,464 03-23-2013, 07:45 PM
Last Post: loriolo
  coating on rolls Jaydev 9 7,077 05-01-2010, 11:27 AM
Last Post: Jaydev
  Hot Rolling Mill Rolls Vijay Deshpande 3 7,259 02-20-2007, 09:33 PM
Last Post: bhellman

Users browsing this thread: 1 Guest(s)

Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd