Reg: Anti stick coatings for moulds and dies.
12-30-2015, 04:13 AM,
#1
Reg: Anti stick coatings for moulds and dies.
Dear Friends,

Can any one let me know what kind of Anti Stick thermal spray powder can be used on Moulds and Dies of automobile industries.

Any kind of Source for procurement of PTFE and teflon based powder would also be helpful for me.

Thanking you in advance.
Reply
12-30-2015, 03:18 PM,
#2
RE: Reg: Anti stick coatings for moulds and dies.
Hi,

You can try Amdry 1371

Ion
Reply
12-31-2015, 09:01 AM,
#3
RE: Reg: Anti stick coatings for moulds and dies.
Hi Dileep,

I have tried some anti stick coatings on some moulds for MAGNA POWERTRAIN but it is not easy as the geometry is very difficult for a thermal sprayed coating to have a equal thickness and quality. You have to spray different angles and rotate the part and even then it is the question if it will work!

We have tried an aluminum oxide material and zirconium oxide but not really an improvement as we had hoped. I am not sure exactly what is the shape of your parts but in our case it were mold for aluminum die casting machine for Audi and VW gearboxes.





Reply
01-04-2016, 11:28 AM,
#4
RE: Reg: Anti stick coatings for moulds and dies.
Hi

looking in the field I have not seen any Thermal Spray Process for this application. Another technology used in Japan is called the TD process

TD Process
TD process produces high-functional coating formed from carbide including niobium, and chromium. In the process, the workpiece is dipped into the high-temperature salt bath to be coated uniformly. The coating is applicable to workpiece of complicated shape and achieves high hardness of Hv3200-3900. TD process is a vital technology and obtains good evaluation in mold production industry.


https://www.tocalo.co.jp/english/technical/td.html
Stephen James Booth
www.ipsteknokraft.com
www.teknokraft.com
Indonesia WhatsApp +6281905603262

Reply
01-04-2016, 03:26 PM,
#5
RE: Reg: Anti stick coatings for moulds and dies.
At what temperature do the molds operate? Many companies spray carbide coatings and impregnate them with PTFE. This produces a tough, non-stick surface, but it cannot take high temperatures.
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  anti-adhesive, low friction coating teresa.rodriguez 5 2,473 07-17-2017, 07:59 PM
Last Post: plasmajet1990
  Hot cut dies plastic compound Iwan Sedaryawan CA 2 1,493 01-20-2017, 05:29 PM
Last Post: loriolo
  Non-stick sealer sprayloud 3 2,917 06-29-2016, 09:38 AM
Last Post: Vadim Verlotski
  Non stick wear resistant coating KevGarty 6 6,853 02-27-2012, 01:21 AM
Last Post: jasonpbond
  Non-stick and adhesion properties of coatings qwerty 2 6,092 12-15-2010, 06:46 AM
Last Post: ives
  anti corrosion coating seysie 7 9,554 10-14-2009, 07:57 AM
Last Post: sunnyshop
  LPPS Coating Temperature and 'Non-Stick' Coatings Rich 2 6,098 06-02-2009, 10:42 AM
Last Post: Rich
  Anti Corrosion Coating istech 4 8,557 09-12-2008, 09:55 PM
Last Post: Stuart Milton
  Anti-corrosion coating for 409 Stainless Steel LEN WOOD 5 15,022 07-24-2008, 10:57 PM
Last Post: tonysemple
Question Anti-sticky coating ? powerman 5 10,165 04-14-2008, 04:28 PM
Last Post: Gordon
Rolleyes Anti-Slip coating jeffsays163 14 16,457 02-19-2008, 03:26 AM
Last Post: Gordon
Cool Anti-Stick/wear coating TintinMilou 3 7,098 11-13-2007, 03:44 AM
Last Post: Gordon
  Coatings for forging dies Marcio Matos dos Santos 1 5,595 10-31-2006, 06:24 PM
Last Post: Gordon



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd