Question on bond strength.
10-09-2012, 10:04 PM,
#1
Question on bond strength.
Using Aluminum Oxide powders we had good bond strength with 24 grit and 60 grit surface preps. (4500 PSI)
Now we are trying the Pure aluminum powders and are running into much lower bond strengths especially with the 60 grit prep. 24 grit (2800 PSI) 60 grit (900 PSI)

What parameter changes might make a difference in pulling up these bond strengths to be closer to the aluminum oxide powders?


BOND TEST PROPERTIES

1 - 60 grit abrasive, Al/Al2Ol3 (A) 3,865 Coating Failure
1 - 60 grit abrasive, Al/Al2Ol3 (B) 4,219 Coating Failure
1 - 60 grit abrasive, Al/Al2Ol3 © 2,233 Coating Failure
1 - 60 grit abrasive, Al/Al2Ol3 (0) 3,439

2 - 24 grit abrasive, Al/Al2Ol3 (A) 3,860 Coating Failure
2 - 24 grit abrasive, Al/Al2Ol3 (B) 3,408 Coating Failure
2 - 24 grit abrasive, Al/Al2Ol3 © 2,642 Coating Failure
2 - 24 grit abrasive, Al/Al2Ol3 (0) 3,303

3 - 60 grit abrasive, Pure Aluminum (A) 955 Coating Failure
3 - 60 grit abrasive, Pure Aluminum (B) 1,048 Coating Failure
3 - 60 grit abrasive, Pure Aluminum © 1,339 Coating Failure
3 - 60 grit abrasive, Pure Aluminum (0) 1,114

4 - 24 grit abrasive, Pure Aluminum (A) 4,384 Coating Failure
4 - 24 grit abrasive, Pure Aluminum (B) 1,728 Coating Failure
4 - 24 grit abrasive, Pure Aluminum © 3,166 Coating Failure
4 - 24 grit abrasive, Pure Aluminum (0) 3,093
Reply
10-10-2012, 10:16 AM,
#2
RE: Question on bond strength.
Hi,

If your substrate is aluminum or aluminum alloy, you must use steel grit to prepare your surface.
You cannot compare bond strength of a ceramic with a metallic coating one.
Typical bond strength with aluminum pure powder is between 2200 and 2900 PSI

Regards

Reply
10-10-2012, 10:42 AM,
#3
RE: Question on bond strength.
(10-10-2012, 10:16 AM)Spraytube Wrote: Hi,

If your substrate is aluminum or aluminum alloy, you must use steel grit to prepare your surface.
You cannot compare bond strength of a ceramic with a metallic coating one.
Typical bond strength with aluminum pure powder is between 2200 and 2900 PSI

Regards


Sir,

I totally agree with post of spray tube.

Regards,

SREENIVAS
Reply
10-10-2012, 03:28 PM,
#4
RE: Question on bond strength.
Thanks for the reply's I owe you one.
Reply
10-13-2012, 10:03 AM, (This post was last modified: 10-13-2012, 10:08 AM by kschewe.)
#5
RE: Question on bond strength.
Maybe you can use a thin bond coat of NiAl with the aluminum coating. It would help the bond strength and it might not matter what grit size you used if you had a bondcoat.
I dont think grit mesh size makes much a difference on steel as you showed with the ceramic testing.

I would like to see test results of steel grits compared to AlO grit. I never heard that, even in our GE manuals they ask for AlO grit for aluminum aircraft parts.
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  HVOF T800 Tensile Bond Strength issue wgg237 3 5,961 09-11-2023, 09:18 AM
Last Post: Sail L
  Info needed on Bond Strength for Thermal Spray powders hereticgame 1 3,331 10-10-2017, 11:39 AM
Last Post: Vadim Verlotski
  95Ni 5Al bond strength alaskangrown 1 3,848 01-15-2016, 05:09 PM
Last Post: loriolo
Shocked Hard Crome Plating Bond strength Met.Eng. 4 7,842 02-24-2015, 02:37 AM
Last Post: Simon Kim
  Arc Wire Spraying Bond Strength wtaz 4 6,361 12-04-2014, 12:02 AM
Last Post: wtaz
  Abradable Coating-Bond Strength rayudugirish 9 15,066 01-06-2014, 09:55 PM
Last Post: derek
  Suggest on coating bond strength tester feifei0609 3 5,575 08-14-2012, 03:10 PM
Last Post: feifei0609
  Surface preparation and its effect on fatigue life and bond strength WMW 4 8,882 06-29-2010, 08:41 AM
Last Post: drramc
  95/5 Bond Strength George Brown 1 4,421 06-02-2010, 09:33 AM
Last Post: Gordon
Question Bond strength of Arc Sprayed Coating sumant 3 11,312 07-31-2008, 12:54 PM
Last Post: LEN WOOD
  tensile bond strength and met examination TurbineRepair 7 10,416 07-23-2008, 03:33 PM
Last Post: TurbineRepair
  Bond strength abhalla 2 10,196 07-19-2006, 07:10 AM
Last Post: Madila Awalini



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd