Problem solved HVOF inside deposition
10-28-2014, 08:20 AM, (This post was last modified: 11-03-2014, 09:20 AM by Boris Eizner.)
#1
HVOF inside deposition
Dear Sirs
Our company A.Termika Ltd has developed a unique HVOF burners for applying coatings inside pipes with a minimum diameter of 75 mm (three inches) and a length of 1.5 m.
Watch our video:
https://www.youtube.com/watch?v=0pDtWIIJCOM
https://www.youtube.com/watch?v=WHnacg19-cQ
https://www.youtube.com/watch?v=CWkOxkFxvnA
https://www.youtube.com/watch?v=q5_92mnOUeY

We will be grateful for the advice and suggestions.
Thank in advance
a.termika@gmail.com
   
   
   
Reply
11-02-2014, 06:42 AM,
#2
RE: HVOF inside deposition
Hi Boris, saw the video, its looking good, answers many questions...
Stephen James Booth
www.ipsteknokraft.com
www.teknokraft.com
Indonesia WhatsApp +6281905603262

Reply
11-02-2014, 10:56 AM,
#3
RE: HVOF inside deposition
Thank you.Our equipment operates in Singapore in several firms. You can see it in action.
Reply
01-13-2015, 10:32 AM, (This post was last modified: 01-13-2015, 10:52 AM by Boris Eizner.)
#4
Unique HVOF ID burners
Dear Colleagues
Our company has developed and released for sale unique HVOF burners for coating inside the tubes. The minimum diameter of pipe 75 mm (3 inches) and the length of the burners from 0.6 m to 1.5 m. The sets with such burners have already been sold and work in many countries.
We will be grateful to all the participants of the forum for advices and suggestions.
Thanks in advance.
Besr Regards
A.Termika Ltd
a.termika@gmail.com
   
Reply
01-16-2015, 09:13 AM,
#5
RE: Unique HVOF ID burners
Torch body is constructed from one-piece lightweight aluminum or durable stainless steel. Stabilizer threads are located outside the torch body to simplify assembly.
Reply
01-17-2015, 11:59 AM, (This post was last modified: 01-17-2015, 12:06 PM by Boris Eizner.)
#6
RE: Unique HVOF ID burners
(01-16-2015, 09:13 AM)jack.son Wrote: Torch body is constructed from one-piece lightweight aluminum or durable stainless steel. Stabilizer threads are located outside the torch body to simplify assembly.
From stainless steel.

   
   
Reply
01-22-2015, 09:39 AM, (This post was last modified: 01-22-2015, 09:40 AM by Boris Eizner.)
#7
Repair of the bolls of boll valves by HVOF
Dear Sirs
By using our HVOF equipment Termika-3 you can repair the balls of ball valves. This technology has already been successfully tried out. (See video).

https://www.youtube.com/watch?v=2kW2QyjTnDM

We will be grateful to all for comments and suggestions.
Thank you in advance
Best Regards
A.Termika Ltd
a.termika@gmail.com
   
Reply
01-22-2015, 10:53 AM,
#8
Technology of Flame Spray-old and new
Dear colleagues
Technology Flame Spray quite old technology. But it still finds his success with the effective use and it can not be ignore . Our company manufactures portable Flame Spray equipment Termika-2 application examples which you can see on the videos.Moreover, in some cases this technology is the most effective.
https://www.youtube.com/watch?v=rMUeseNXKMY
https://www.youtube.com/watch?v=3XXPy0xeet8

We would appreciate comments and suggestions
Thank you in advance
Best Regards
A.Termika Ltd
a.termika@gmail.com
   
   
Reply




Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd