Problem for plasma powder line
08-17-2015, 01:22 PM,
Problem for plasma powder line

I am confused by the powder line, I use Multicoat system with F4 gun, the powder feeder is Twin-120-A. do we need to change the powder line every time when we spray the bondcoat and topcoat? Is there a solution for this situation, we can spray the bondcoat and topcoat without change the powder line.
08-18-2015, 06:45 AM,
RE: Problem for plasma powder line
Install 2 powder lines (one from each hopper - bond & top coat) to 2 injectors mounted on a 'double powder injector holder'
Easy as! Cool

Len Wood
Ph: +64 9 4730705
Fax: +64 9 4730706

Possibly Related Threads…
Thread Author Replies Views Last Post
  Craking problem in Al2O3+ TiO2 plasma coating Hector Monjardin 4 3,814 09-22-2016, 01:33 PM
Last Post: Hector Monjardin
  Help,problem with the injector powder. Kirill 4 4,433 07-31-2015, 06:51 PM
Last Post: loriolo
  problem with SG100 plasma gun vetrinit 3 6,304 11-26-2014, 06:23 AM
Last Post: vetrinit
  Problem on plasma flame mlavar 2 3,886 09-05-2014, 08:47 AM
Last Post: amardigital
  HVOF Tungsten Carbide - New Line Setup David 1 4,282 08-16-2014, 03:51 PM
Last Post: Gordon
Question problem about powder paint application over Zn metalizing basakglkn 8 15,475 05-23-2012, 08:21 AM
Last Post: Jaydev
  relationship between powder feed rate and carrier gas flow rate in plasma spray?????? fahad03092 4 9,065 11-20-2011, 01:16 AM
Last Post: ServiceTech
  After mixing, do we need to sieve the powder for plasma spray??? fahad03092 1 3,745 10-18-2011, 06:38 PM
Last Post: Gordon
  Auto scrapper for sink roll in galvalume line nettrade 0 5,105 01-12-2010, 03:55 AM
Last Post: nettrade
  center line tolerance. RVRTRSH 5 6,933 11-02-2009, 04:24 PM
Last Post: RVRTRSH
  Crack line ykang 18 19,729 04-18-2009, 11:24 PM
Last Post: LEN WOOD
  question about powder reaction during plasma spray process greentree 3 5,997 03-13-2009, 05:09 PM
Last Post: Gordon
  Oily substance in LPG line sutech 4 7,565 10-10-2008, 06:54 PM
Last Post: Gordon

Users browsing this thread: 1 Guest(s)

Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd