Prevent of getting oval
05-17-2015, 06:13 PM, (This post was last modified: 05-19-2015, 06:25 PM by behzadsaberi.)
#1
Prevent of getting oval
Hello
I’m going to coat outer surface of several cylinders with the dimensions of φ190×230 & φ220×260 and wall thickness of 5.5 & 7mm respectively. The materials of these cylinders are stainless steel 420 & 316.
I really concern of getting the cylinders oval because of heating. So I really need your recommendation about this issue and your suggestions for rotating and traversing speed.
The coat composition is WC-10Co-4Cr and the coating method is HP-HVOF.
Regards
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  Coating to prevent carbon and stainless steel to corrode togehter Grettir 4 6,722 12-17-2009, 10:55 PM
Last Post: djewell



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd