Powder stabilization time and coating time limit
06-25-2020, 07:47 AM,
Powder stabilization time and coating time limit

I am exploring the idea of automating HVOF coating in a mass production scale.

But currently, I have a few queries that I have not be able to sort out.

1. Powder stabilization time - how much time does it normally take for the powder feed rate to be stable upon "fire up", before it is good to start coating?

2. If were to do continuous spraying … is there a limit or guideline as to how long a gun is keep firing before it need to "rest".

Currently - most of the HVOF application that I have seen online, are batch processing .. would really appreciate is anyone can share with me, HVOF application in an automated setting.

Thank You
06-25-2020, 12:59 PM, (This post was last modified: 06-26-2020, 02:17 PM by Lemster68.)
RE: Powder stabilization time and coating time limit
1. You never can really know unless you have a spraywatch or monitoring system to give feedback on when it is good spray and ready. You might have a leak or who knows what kind of problem so we prompt operator to confirm that it looks ok to start.

2. So long as your cooling is adequate you can run until there are spits from a dirty barrel or it wears so much that you develop leaks. Dirty barrel can vary depending on your spray parameters and feedstock material. Again, monitoring is necessary as to when to shut it down.

Possibly Related Threads…
Thread Author Replies Views Last Post
  Thermal Spray Tolerance Limit vancutan 1 2,056 12-17-2016, 10:55 PM
Last Post: loriolo
  Surface contact stress limit over an HVOF coating HVoilF 1 3,905 05-22-2013, 02:07 PM
Last Post: djewell
  Mixing powder and Time duration for sieve shaker?????????? fahad03092 5 5,357 10-24-2011, 11:53 PM
Last Post: fahad03092
  Thermal Spray Tolerance Limit Alexangel1226 8 12,422 12-24-2007, 06:46 PM
Last Post: hvofhamid

Users browsing this thread: 1 Guest(s)

Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd