Peel able carbon steel mask
06-20-2012, 11:37 AM,
#1
Peel able carbon steel mask
Hi everyone,

I'm currently working on carbon-steel mask to make it more durable and become reusable. I don't know if Al-mask will work well, but i find from some literature that over spray material may form build-up on the surface of aluminium mask.
Some publications suggest low surface roughness and hardness of mask top coating (especially for HVOF).

I would like to know if anyone have ideas/had experience how to make metallic mask reusable/peel-able ?
Thanks,

Regards,
Phiciato
Reply
06-22-2012, 09:49 AM,
#2
RE: Peel able carbon steel mask
Most use some sort of graphite coating or moly coating on fixtures and the overspray will peel or wash off. Good example is metco antibond. It washes of with water and not toxic.
Reply
06-22-2012, 08:17 PM,
#3
RE: Peel able carbon steel mask
Aluminum masking works well, as long as the masking piece is thick enough. We use some aluminum masking pieces on a regular basis, and we re-use them many times. Aluminum masking pieces are cheap to build and easy to machine. I recommend it highly.
Reply
08-17-2012, 09:17 AM,
#4
RE: Peel able carbon steel mask
I just know the HVOF, it is the short of high velocity oxyfuel spraying.
It is based on a high-pressure combustion system with a miniature rocket engines. Ultrasonic airflow spraying process, the mixture of fuel and oxygen to produce a temperature of 2 800 ° C (greater than 2 000 m / s), fuel, including kerosene, hydrogen, propylene, propane, acetylene, methyl acetylene, natural gas. The introduction of combustion in the material of heat and flame the powder, available in almost unlimited variety of substrate coating. This coating has high hardness and durability, and the matrix combined with a sturdy, large thickness range.

Hope the infomation is useful for you.
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  Silicon Mask or Metal Mask for HVOF Taz 9 4,055 01-30-2023, 07:24 AM
Last Post: Taz
  High Carbon Steel - Ammonia corrosion thorgrim 1 1,766 05-23-2021, 12:45 PM
Last Post: Vadim Verlotski
  Surface hardening [steel + steel alloys] haggis 1 3,682 07-09-2017, 12:42 PM
Last Post: plasmajet1990
  Metco Super Spray Mask - alternative? Pete_F 3 4,547 04-12-2017, 05:41 PM
Last Post: J!m
  carbon steel powder Bob 19 37,075 01-12-2017, 07:10 AM
Last Post: Kell
  Problem solved coat Inside Diameter of 16" pipes sch 40 Carbon steel with any kind of material that Iwan Sedaryawan CA 0 3,644 11-11-2014, 06:27 AM
Last Post: Iwan Sedaryawan CA
  Who can tell me how to spray on carbon? lifei 10 10,991 12-21-2011, 05:55 PM
Last Post: joyee
  HVOF coating on Extursion Ram peel off raviswanadha 3 6,854 08-02-2011, 04:42 PM
Last Post: MichiganMan
  Peel of coating during pressure testing raviswanadha 6 9,190 01-14-2011, 08:49 PM
Last Post: Gordon
  Coating options for large carbon steel tank Jimmy D. 9 12,965 12-15-2010, 07:50 AM
Last Post: ives
  Coating to prevent carbon and stainless steel to corrode togehter Grettir 4 7,918 12-17-2009, 10:55 PM
Last Post: djewell
  Metco601 coating peel off joanwang 4 7,792 12-02-2009, 03:09 PM
Last Post: joanwang



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd