Login

texnicar · 03-03-2015, 11:18 AM,

Hi everyone,
i can`t understund tabel where sulzer give information about particle size distribution. Can anyone describe me?

Thank`s, Sasa.

djewell · 03-03-2015, 10:27 PM,

The specification indicates the allowed proportion of particles of various sizes in the powder. For 204B-NS, the distribution is:

maximum 10% of particles are greater than 200 mesh (74 um)
65-100% of particles are between 325 and 200 mesh (44-74 um)
maximum 25% of particles are smaller than 325 mesh (44 um)
0 particles below 11 um

texnicar · 03-04-2015, 07:43 AM,

(03-03-2015, 10:27 PM)djewell Wrote: The specification indicates the allowed proportion of particles of various sizes in the powder. For 204B-NS, the distribution is:

maximum 10% of particles are greater than 200 mesh (74 um)
65-100% of particles are between 325 and 200 mesh (44-74 um)
maximum 25% of particles are smaller than 325 mesh (44 um)
0 particles below 11 um

Thank`s, djewell

Login
Username:
Password:	Lost Password?
	Remember me

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	Roughness and particle size	hustzc	5	8,586	07-05-2018, 06:39 PM Last Post: velocity
	About electrodeposition of Ni-Cr particle on steel plate	Catherine	0	3,526	06-06-2013, 04:05 AM Last Post: Catherine
	After ball milling, is the powder particle size will be changed?	fahad03092	1	4,834	11-21-2012, 11:14 PM Last Post: loriolo
	Grit size	sam xu	3	6,754	03-23-2012, 04:24 PM Last Post: sam xu
	Loose Particle of Flame Coat	operator	6	8,606	12-26-2011, 02:11 PM Last Post: plasmajet1990
	How to decide grit size ?	bepsi	6	17,320	04-29-2011, 05:56 AM Last Post: wilfred1963
	Ash Particle Hardness and Effect on Material	Operator Mike	1	6,173	08-08-2009, 07:47 PM Last Post: Gordon
	Molten Particle Temperature	powerman	3	7,701	05-12-2008, 04:45 PM Last Post: Intel55
	Pore size in carbides	Jeff	5	8,922	12-04-2007, 04:39 PM Last Post: Gordon
	How to read a Media Size vs. Intensity chart	gejohn	2	10,173	02-15-2007, 06:12 PM Last Post: Gordon