Particle size distributin
03-03-2015, 11:18 AM,
#1
Particle size distributin
Hi everyone,
i can`t understund tabel where sulzer give information about particle size distribution. Can anyone describe me?

Thank`s, Sasa.


Attached Files
.bmp   565465.bmp (Size: 386.1 KB / Downloads: 423)
Reply
03-03-2015, 10:27 PM,
#2
RE: Particle size distributin
The specification indicates the allowed proportion of particles of various sizes in the powder. For 204B-NS, the distribution is:

maximum 10% of particles are greater than 200 mesh (74 um)
65-100% of particles are between 325 and 200 mesh (44-74 um)
maximum 25% of particles are smaller than 325 mesh (44 um)
0 particles below 11 um
Reply
03-04-2015, 07:43 AM,
#3
RE: Particle size distributin
(03-03-2015, 10:27 PM)djewell Wrote: The specification indicates the allowed proportion of particles of various sizes in the powder. For 204B-NS, the distribution is:

maximum 10% of particles are greater than 200 mesh (74 um)
65-100% of particles are between 325 and 200 mesh (44-74 um)
maximum 25% of particles are smaller than 325 mesh (44 um)
0 particles below 11 um

Thank`s, djewell

Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  Roughness and particle size hustzc 5 7,897 07-05-2018, 06:39 PM
Last Post: velocity
  About electrodeposition of Ni-Cr particle on steel plate Catherine 0 3,310 06-06-2013, 04:05 AM
Last Post: Catherine
  After ball milling, is the powder particle size will be changed? fahad03092 1 4,594 11-21-2012, 11:14 PM
Last Post: loriolo
Shy Grit size sam xu 3 6,352 03-23-2012, 04:24 PM
Last Post: sam xu
  Loose Particle of Flame Coat operator 6 7,956 12-26-2011, 02:11 PM
Last Post: plasmajet1990
  How to decide grit size ? bepsi 6 16,666 04-29-2011, 05:56 AM
Last Post: wilfred1963
  Ash Particle Hardness and Effect on Material Operator Mike 1 5,886 08-08-2009, 07:47 PM
Last Post: Gordon
  Molten Particle Temperature powerman 3 7,095 05-12-2008, 04:45 PM
Last Post: Intel55
  Pore size in carbides Jeff 5 8,211 12-04-2007, 04:39 PM
Last Post: Gordon
Question How to read a Media Size vs. Intensity chart gejohn 2 9,548 02-15-2007, 06:12 PM
Last Post: Gordon



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd