PTA WELDING INSIDE ELBOWS
09-25-2013, 02:14 PM,
#1
PTA WELDING INSIDE ELBOWS
Anyone have ideas on PTA welding stellite inside elbows. The inside dia is between 6 to 8 inches. The complete area has to be coated. What type of manipulation and extension equipment can be used to semi automate it?
Reply
09-26-2013, 04:16 AM,
#2
RE: PTA WELDING INSIDE ELBOWS
Hi Zanitech,

Good morning to you;

I have set up a few PTA torches using off the shelf semi automation, but the elbow seems a bit more of a challenge. Maybe you can consider a swivel to mount the elbow, so that the welding is nearly always in the downhand position. For the torch manipulation, could be a X-W manipulator, weaving and indexing, most likely an operator running the equipment and making adjustments, etc during the welding.

Torches you can get http://www.tbi-industries.com/ torches


To get a turn key solution, I think you have to contact the main equipment makers, and automation makers:

My recommendation would be: www.primoautomation.com
Corporate Office :
#8, Multi Industrial Nagar,
Gerugambakkam,
Chennai - 602 101, INDIA
Ph : 91-44-42992500 (30 Lines)
Fax : 91-44-23820510/42992510

Works:
Survey No.500/5 to 500/8,
Amarambedu Village,
Sriperumbudur,
Chennai - 602109, INDIA
Ph. : 91-44-47112600
E-mail : marketing@primoautomation.com




Stephen James Booth
www.ipsteknokraft.com
www.teknokraft.com
Indonesia WhatsApp +6281905603262

Reply
09-27-2013, 09:09 AM,
#3
RE: PTA WELDING INSIDE ELBOWS
Thank you for your suggestions Stephen!
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  coating seperation after welding raviswanadha 1 1,427 12-17-2016, 11:08 PM
Last Post: loriolo
  STUBS WELDING ALLOYS SW7 wtaz 2 2,925 10-06-2016, 10:32 PM
Last Post: wtaz
  Stellite 6 welding rods Desmond 7 13,798 04-18-2016, 07:31 AM
Last Post: sreenuvundela
  HVOF coatings on inside diameters down to 8 cm [split] SteelDryver 11 13,204 01-14-2015, 06:53 AM
Last Post: jack.son
  Problem solved coat Inside Diameter of 16" pipes sch 40 Carbon steel with any kind of material that Iwan Sedaryawan CA 0 2,360 11-11-2014, 06:27 AM
Last Post: Iwan Sedaryawan CA
  Avoiding Diffusion Welding in SS under Vac' Nick Clark 7 9,786 03-03-2007, 05:43 PM
Last Post: hapewoe



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd