PAC9620 NiCrAlY for HVOF
02-29-2012, 08:08 AM,
#1
PAC9620 NiCrAlY for HVOF
Guys,

I'm right now trying to use PAC9620 powder for NiCrAlY using HVOF and i tried to use NI-211-4 PRAXAIR parameter as both of the powder have similar grain size and composition. But there result of the spray is not good and i have tried to adjust the parameter but it still no give a good result in term of thickness. I think the best solution is to have reference parameter for PAC9620 for HVOF as guidance and with the reference, i can fine tune the parameter to get better result.

Anybody can help or have PAC9620 reference parameter for HVOF?

Thanks

Regards
Azraf
Reply
03-08-2012, 04:37 PM,
#2
RE: PAC9620 NiCrAlY for HVOF
Hi Azraf

Have you tried asking the powder supplier/manufacturer (Powder Alloy Corp)?
Reply
03-12-2012, 01:30 PM,
#3
RE: PAC9620 NiCrAlY for HVOF
Remember, every spray system and every spray gun and of course every material, even if similar, has it's own parameters.
Best regards
Luigi
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  NiCrAlY interface separation edrazee 10 4,506 03-05-2020, 01:10 AM
Last Post: edrazee
  APS for NiCrAlY(Amdry962) by SG100 Terryzhang 3 4,910 06-27-2013, 04:00 PM
Last Post: Terryzhang



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd