Oerlikon Metco Unicoat Simplex Vs Saint Gobain Masterjet Vs Metallisation Uk

[parag-patel]

Hi!

Can you help me to choose system for Ceramic coating for anilox roller and what are the differences between below systems

Oerlikin Metco Unicoat System
Saint Gobain Masterjet
Metallisation UK

It would be great help to set up my new workshop

Best Regards,

Parag

[pcdmt]

Hi!

Can you help me to choose system for Ceramic coating for anilox roller and what are the differences between below systems

Oerlikin Metco Unicoat System
Saint Gobain Masterjet
Metallisation UK

It would be great help to set up my new workshop

Best Regards,

Parag

Have you chosen one?

[velocity]

Unicoat is one of the most challenging product of Oerlikon. In my market almost all suppliers choosed it. Check support and spares accessibility in your country.

[mgbaca1]

In selection of plasma spray equipment You should consider also other producers :
AMT :
http://www.amt-ag.com/equipment/systems/...00c-plasma
GTV:
https://www.gtv-mbh.com/_old/gtv-mbh-eng...l?idcat=57
Flame spray technologies (FST):
https://www.fst.nl/systems/turn-key-ther...y-systems/

They are similar quality of products in comparision with Oerlikon Metco
There is also company which coating equipment producers - Clerici engineering (we have some equipment form this company and its quality is like Oerlikon):http://www.clerici-engineering.ch/maschinenbau.php

If you cannot choose of those companies I can reccomend products of Oerlikon-Metco but it is more expensive than others

The Metallisation and Saint-Gobain is not leading manufacturer of plasma spray equipment

[Lemster68]

I have a high opinion of Progressive Surface.

[Vadim Verlotski]

If we want to achieve the best possible quality of Cr2O3 layer, then I can only recommend Axial III:

[mgbaca1]

The Pregressive Surface makes propably good equipment but the main problem is always a service support in different countries. It is good idea to buy progressive for example in US. In europe they need a good service support.

[Stuart Milton]

In selection of plasma spray equipment You should consider also other producers :
AMT :
http://www.amt-ag.com/equipment/systems/...00c-plasma
GTV:
https://www.gtv-mbh.com/_old/gtv-mbh-eng...l?idcat=57
Flame spray technologies (FST):
https://www.fst.nl/systems/turn-key-ther...y-systems/

They are similar quality of products in comparision with Oerlikon Metco
There is also company which coating equipment producers - Clerici engineering (we have some equipment form this company and its quality is like Oerlikon):http://www.clerici-engineering.ch/maschinenbau.php

If you cannot choose of those companies I can reccomend products of Oerlikon-Metco but it is more expensive than others

The Metallisation and Saint-Gobain is not leading manufacturer of plasma spray equipment

I declare that I work for Metallisation so am bound to make this comment. To state that Metallisation is not a leading supplier of plasma spray equipment is factually incorrect. Whilst not as large as some competitors in this field, our product is well respected by those using it. This includes companies in the aerospace and oil&gas industries as well as general contracting. I suggest that you get in contact with the companies you are considering and make your own judgement on how they respond and support. The selection of equipment should be based on your experience, requirements and the applications you are considering.

[Stephen Booth]

In selection of plasma spray equipment You should consider also other producers :
AMT :
http://www.amt-ag.com/equipment/systems/...00c-plasma
GTV:
https://www.gtv-mbh.com/_old/gtv-mbh-eng...l?idcat=57
Flame spray technologies (FST):
https://www.fst.nl/systems/turn-key-ther...y-systems/

They are similar quality of products in comparision with Oerlikon Metco
There is also company which coating equipment producers - Clerici engineering (we have some equipment form this company and its quality is like Oerlikon):http://www.clerici-engineering.ch/maschinenbau.php

If you cannot choose of those companies I can reccomend products of Oerlikon-Metco but it is more expensive than others

The Metallisation and Saint-Gobain is not leading manufacturer of plasma spray equipment

I declare that I work for Metallisation so am bound to make this comment. To state that Metallisation is not a leading supplier of plasma spray equipment is factually incorrect. Whilst not as large as some competitors in this field, our product is well respected by those using it. This includes companies in the aerospace and oil&gas industries as well as general contracting. I suggest that you get in contact with the companies you are considering and make your own judgement on how they respond and support. The selection of equipment should be based on your experience, requirements and the applications you are considering.

Agreed. Metallisation has an experienced team, and good group of distributors around the world.

check them out....