Nitrogen Cooling
08-14-2019, 07:06 PM,
#1
Nitrogen Cooling
Does anyone have any experience cooling with Nitrogen instead of compressed air? Is it a worth while pursuit?
Reply
08-15-2019, 12:35 PM,
#2
RE: Nitrogen Cooling
(08-14-2019, 07:06 PM)Neufeld Wrote: Does anyone have any experience cooling with Nitrogen instead of compressed air? Is it a worth while pursuit?

No, cooling with liquid nitrogen instead of compressed air makes little sense. Much greater effect gives a quick relative movement of the burner (better temperature distribution to component along with thinner layer thicknesses per pass). Even when coating a small component, it is much better to divide the burner energy into several simultaneously rotating identical components than to cool one of it with liquid nitrogen.
Reply
08-20-2019, 11:40 AM,
#3
RE: Nitrogen Cooling
Hi Neufeld
This new technology, using cryogenic nitrogen to maintain constant temperature during HVOF or APS coating applications, is normally used on aerospace applications in order to improve coating quality and reduce the production costs, furthermore, you could maintain the specified coating temperature limits, and reduce coating surface stresses with better coating technical performance.
Best regards
Luigi
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  Part shrinkage after cooling down. Rage2371 5 2,493 06-14-2018, 09:42 PM
Last Post: KevGarty
  Reg: Cooling process. Dileep 2 3,460 10-16-2015, 01:05 AM
Last Post: Johnny_Blaze
  hvof cooling kschewe 0 2,826 07-16-2012, 06:10 AM
Last Post: kschewe
  3MB gun air cooling Azraf Saip 1 3,224 10-21-2011, 09:15 PM
Last Post: LEN WOOD
  Masking of Cooling Holes gshejale 4 7,097 01-20-2008, 10:09 PM
Last Post: plasmajet1990
  cooling jets karlos 1 6,543 06-14-2007, 12:49 PM
Last Post: Gordon



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd