NiCr 50/50 wire 1/8" or 3.17mm sources
01-18-2008, 06:21 PM, (This post was last modified: 01-18-2008, 10:48 PM by Intel55.)
#1
NiCr 50/50 wire 1/8" or 3.17mm sources
Looking for sources in the US for some NiCr 50/50 wire. Any leads??
Polymet = yes, but..
Techalloy = neg.
Haynes = neg.
A-1 wire = neg.

same wire as Tafa 45CT

any others???

thanks
Reply
01-19-2008, 03:54 AM,
#2
RE: NiCr 50/50 wire 1/8" or 3.17mm sources
Hi Intel55

Boiler tubes by any chance? I take it that your looking for a cheaper source of wire. I will come back if I come across another good supplier. Good luck Big Grin
Reply
01-29-2008, 10:57 PM,
#3
RE: NiCr 50/50 wire 1/8" or 3.17mm sources
yup, boiler tubes Smile

yeah not very many places at all, polymet is one and durmat in Germany. Not very common I guess.
Reply
10-20-2008, 12:07 PM,
#4
RE: NiCr 50/50 wire 1/8" or 3.17mm sources
We are using 95MXC over BondArc75B. We are getting good result. 95Mxc is cheaper then 45CT.
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
Sad how to increase hardness of CrC-NiCr Bler 10 7,552 01-06-2013, 09:54 PM
Last Post: loriolo
  crack in NiCr Panf 11 10,246 10-22-2008, 10:56 AM
Last Post: Panf
  twin wire arc spraying equipment for stainless steel wire, monel wire, etc. technovel 6 10,643 08-01-2008, 11:59 AM
Last Post: adam wintle
  Preheating heat sources powerman 2 4,921 07-29-2007, 12:19 AM
Last Post: powerman
  Importance of NiCr in Chromium Carbide Coatings DJr9515 2 6,281 07-17-2007, 01:31 AM
Last Post: Gordon



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd