Need help to identify an unidentified coat
04-30-2015, 05:45 PM, (This post was last modified: 04-30-2015, 07:58 PM by behzadsaberi.)
#1
Need help to identify an unidentified coat
Hi forum.
Recently I have seen a wire drawing capstan which had been coated by an unidentified smooth black substance and use for drawing the steel wire. Usually these kinds of capstans are coated by tungsten carbide and I am sure this black coat is not tungsten carbide. So my question is what kind of coat could that be? In my net navigation i have found "black mangnes phosphate" as a probable candidate for this black coat. I impatiently wait for your responses.
Regard
Reply
05-01-2015, 10:35 PM,
#2
RE: Need help to identify an unidentified coat
Hi
Wire drawing capstan are coated with aluminum oxide/13% titanium oxide powder, and some time its coated with crome oxide, it dipend of the wire diameter and quality.
Best regards
Luigi
Reply
05-03-2015, 05:21 PM,
#3
RE: Need help to identify an unidentified coat
(04-30-2015, 05:45 PM)behzadsaberi Wrote: Hi forum.
Recently I have seen a wire drawing capstan which had been coated by an unidentified smooth black substance and use for drawing the steel wire. Usually these kinds of capstans are coated by tungsten carbide and I am sure this black coat is not tungsten carbide. So my question is what kind of coat could that be? In my net navigation i have found "black mangnes phosphate" as a probable candidate for this black coat. I impatiently wait for your responses.
Regard

Dear Behzad,
You can use coating for wire drawing capstans :
1- Wire drawing drumSadDiameter :650 mm) for high carbon steel,Tungsten-carbide by HVOF (WC-12Ni,WC-Co-Cr,WC-12Co+NiCrBSi or WC-Co/CrC-Ni)
For low carbon steel, Ceramic (Cr203) by Plasma Spray.
2- For wet drawing : First WC+NiCrBSi by flame spray or HVOF than fused.

Regards

Turgut

Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  Recomended bond coat for Metco 81 VFNS top coat achmadarifudinh 9 4,717 07-06-2023, 04:54 PM
Last Post: ServiceTech
  Metallic HVOF bond coat to TBC APS top coat Gas turbines achmadarifudinh 0 1,839 07-08-2019, 08:34 AM
Last Post: achmadarifudinh
  Possibility Study to use Stellite - 306 Bond Coat for 75Cr3C2 -25NiCr Top Coat -Reg sreenuvundela 2 5,940 09-14-2011, 05:36 AM
Last Post: sreenuvundela



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd