Metco flowmeter tube
06-24-2008, 10:07 PM,
#1
Metco flowmeter tube
Hi all,

I have a Metco 7M equipment and I need as spare part the Flowmeter tube (argon).
Has anybody some informations about where could I buy the Flowmeter tube for argon ?
At Metco it is no longer available.

Thanks,

Ion Trusca
Reply
06-25-2008, 04:53 AM,
#2
RE: Metco flowmeter tube
Hi Also,

I have been looking for this part and other flowmeter tubes for the 7MC equipment for about 5 years now, and I am keen to have a supplier for this as well.
Stephen James Booth
www.ipsteknokraft.com
www.teknokraft.com
Indonesia WhatsApp +6281905603262

Reply
06-25-2008, 01:25 PM,
#3
RE: Metco flowmeter tube
I might know someone.

Questions:

What’s the flow range ?

Scfh or LPM (both) ?

Tube size/dimensions ?

Got a photo ?

Flow device (ball…) ?
Reply
06-25-2008, 04:20 PM,
#4
RE: Metco flowmeter tube
Intel55 Wrote:I might know someone.

Questions:

What’s the flow range ?

Scfh or LPM (both) ?

Tube size/dimensions ?

Got a photo ?

Flow device (ball…) ?

Hello Intel,

Thanks

Original flowmeter tube : Fisher&Porter FP-1/4-41-P-3/37

0-200 SCFH

Ion
Reply
06-26-2008, 03:15 PM,
#5
RE: Metco flowmeter tube
plasmajet1990 Wrote:
Intel55 Wrote:I might know someone.

Questions:

What’s the flow range ?

Scfh or LPM (both) ?

Tube size/dimensions ?

Got a photo ?

Flow device (ball…) ?

Hello Intel,

Thanks

Original flowmeter tube : Fisher&Porter FP-1/4-41-P-3/37

0-200 SCFH

Ion

hey do you have the serial number that is on the tube? starts with 2 digits then a W and then 6 digits.

or what it was metered at? temp and psi.
Reply
06-27-2008, 01:07 PM,
#6
RE: Metco flowmeter tube
Intel55 Wrote:
plasmajet1990 Wrote:
Intel55 Wrote:I might know someone.

Questions:

What’s the flow range ?

Scfh or LPM (both) ?

Tube size/dimensions ?

Got a photo ?

Flow device (ball…) ?

Hello Intel,

Thanks

Original flowmeter tube : Fisher&Porter FP-1/4-41-P-3/37

0-200 SCFH

Ion

hey do you have the serial number that is on the tube? starts with 2 digits then a W and then 6 digits.

or what it was metered at? temp and psi.

Hi,

The serial number is 93W028015.

Thanks,
Ion
Reply
06-27-2008, 03:06 PM,
#7
RE: Metco flowmeter tube
Primary gas and helium secondary gas flowmeters on the Metco 7MC and earlier plasma consols are calibrated SCFH with nitrogen at 50 psi @ 70F.
Reply
06-27-2008, 07:32 PM,
#8
RE: Metco flowmeter tube
Gordon Wrote:Primary gas and helium secondary gas flowmeters on the Metco 7MC and earlier plasma consols are calibrated SCFH with nitrogen at 50 psi @ 70F.

Thanks Mr. Gordon

Ion
Reply
06-30-2008, 05:26 PM,
#9
RE: Metco flowmeter tube
I think I found some. Will know later today and hopefully a quote by tomorrow.
Reply
06-30-2008, 07:10 PM,
#10
RE: Metco flowmeter tube
Intel55 Wrote:I think I found some. Will know later today and hopefully a quote by tomorrow.

Thank you.

Ion
Reply
07-02-2008, 09:23 PM,
#11
RE: Metco flowmeter tube
the guy is out on a calibration... so I am stuck waiting. As soon as I get something I will let you know.
Reply
07-03-2008, 08:52 PM,
#12
RE: Metco flowmeter tube
Intel55 Wrote:the guy is out on a calibration... so I am stuck waiting. As soon as I get something I will let you know.

Ok.
Thank you

Ion
Reply
07-09-2008, 04:20 PM,
#13
RE: Metco flowmeter tube
whew.... finally, I can find two in stock. PM me for price.

There is also a conversion kit so you can use 9m tubes, somewhat expensive though.

also do you need tube only or tube and float?
Reply
07-09-2008, 09:03 PM,
#14
RE: Metco flowmeter tube
Intel55 Wrote:whew.... finally, I can find two in stock. PM me for price.

There is also a conversion kit so you can use 9m tubes, somewhat expensive though.

also do you need tube only or tube and float?

Hi,

Thank you !

I need both tube and float.
If there is no float I would be content only with the tube.
Please let me know how much and where to pay.

Regards,
Ion Trusca
Reply
07-09-2008, 09:25 PM,
#15
RE: Metco flowmeter tube
Ok, I will PM you the contact info and price. They can get the float as well. Do you know how many you need?
Reply
07-14-2008, 08:20 PM,
#16
RE: Metco flowmeter tube
contact info PM'ed. They do have the float and tube. I guess they finishing up the conversion kit.
Reply
07-22-2008, 04:09 PM,
#17
RE: Metco flowmeter tube
Hi Ion,
I can supply what you require and have sent you a private e-mail with price and delivery times.

Regards Lee


plasmajet1990 Wrote:Hi all,

I have a Metco 7M equipment and I need as spare part the Flowmeter tube (argon).
Has anybody some informations about where could I buy the Flowmeter tube for argon ?
At Metco it is no longer available.

Thanks,

Ion Trusca
Reply
07-23-2008, 02:18 PM, (This post was last modified: 07-23-2008, 02:18 PM by Intel55.)
#18
RE: Metco flowmeter tube
KIAHBEAUTY Wrote:Hi Ion,
I can supply what you require and have sent you a private e-mail with price and delivery times.

Regards Lee

WTF. Did you not read the thread?
Mad0214
Reply
07-23-2008, 07:45 PM,
#19
RE: Metco flowmeter tube
I am sorry Intel,
did not know that the Thermalspray Community was a closed market!
I think that is was was you meant by your thread? What does WTF mean? excuse my ignorance but as you know I am new to this message board.
Am I not following the right etiquette?...Sad
Please advise?

Lee

Hi Ion,
I can supply what you require and have sent you a private e-mail with price and delivery times.

Regards Lee



[/quote]

WTF. Did you not read the thread?
Mad0214
[/quote]
Reply
07-23-2008, 08:16 PM, (This post was last modified: 07-23-2008, 08:23 PM by Intel55.)
#20
RE: Metco flowmeter tube
Not a closed market. Just that when the thread has obviously been handled by one person, made the calls, got the quotes, you should ethically stay out imo. You did not break any rules or anything and you are free to compete (might have a difficult time with you being pound priced and me being USD), but it just comes across as poor taste to me, nothing more. I would not jump into a thread that had you handling requests over the course of a couple weeks and especially after you gave out contact info and quotes.
anyway no worries.


tubes + float in stock (small supply right now)
conversion kit almost completed from what I was told.
PM for contact info and price.
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  Hose end Assy with copper tube Joe M 3 789 05-21-2020, 03:16 AM
Last Post: Vivian Ruan
  Arc Spray Equipment for zinc coating on Condenser tube Gary 7 6,761 01-21-2014, 06:28 AM
Last Post: Gary
  7MC with 9MC flowmeter UPGRADE Intel55 1 3,980 07-10-2009, 06:01 PM
Last Post: Intel55
  Wanted Sulzer Metco OSU TUBE-300 or CAP-300 or Value Pro Arc-200 accurate 2 6,422 06-06-2009, 02:46 PM
Last Post: Gordon



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd