Metco flowmeter tube

[plasmajet1990]

Hi all,

I have a Metco 7M equipment and I need as spare part the Flowmeter tube (argon).
Has anybody some informations about where could I buy the Flowmeter tube for argon ?
At Metco it is no longer available.

Thanks,

Ion Trusca

[Stephen Booth]

Hi Also,

I have been looking for this part and other flowmeter tubes for the 7MC equipment for about 5 years now, and I am keen to have a supplier for this as well.

[Intel55]

I might know someone.

Questions:

What’s the flow range ?

Scfh or LPM (both) ?

Tube size/dimensions ?

Got a photo ?

Flow device (ball…) ?

[plasmajet1990]

I might know someone.

Questions:

What’s the flow range ?

Scfh or LPM (both) ?

Tube size/dimensions ?

Got a photo ?

Flow device (ball…) ?

Hello Intel,

Thanks

Original flowmeter tube : Fisher&Porter FP-1/4-41-P-3/37

0-200 SCFH

Ion

[Intel55]

I might know someone.

Questions:

What’s the flow range ?

Scfh or LPM (both) ?

Tube size/dimensions ?

Got a photo ?

Flow device (ball…) ?

Hello Intel,

Thanks

Original flowmeter tube : Fisher&Porter FP-1/4-41-P-3/37

0-200 SCFH

Ion

hey do you have the serial number that is on the tube? starts with 2 digits then a W and then 6 digits.

or what it was metered at? temp and psi.

[plasmajet1990]

I might know someone.

Questions:

What’s the flow range ?

Scfh or LPM (both) ?

Tube size/dimensions ?

Got a photo ?

Flow device (ball…) ?

Hello Intel,

Thanks

Original flowmeter tube : Fisher&Porter FP-1/4-41-P-3/37

0-200 SCFH

Ion

hey do you have the serial number that is on the tube? starts with 2 digits then a W and then 6 digits.

or what it was metered at? temp and psi.

Hi,

The serial number is 93W028015.

Thanks,
Ion

[Gordon]

Primary gas and helium secondary gas flowmeters on the Metco 7MC and earlier plasma consols are calibrated SCFH with nitrogen at 50 psi @ 70F.

[plasmajet1990]

Primary gas and helium secondary gas flowmeters on the Metco 7MC and earlier plasma consols are calibrated SCFH with nitrogen at 50 psi @ 70F.

Thanks Mr. Gordon

Ion

[Intel55]

I think I found some. Will know later today and hopefully a quote by tomorrow.

[plasmajet1990]

I think I found some. Will know later today and hopefully a quote by tomorrow.

Thank you.

Ion

[Intel55]

the guy is out on a calibration... so I am stuck waiting. As soon as I get something I will let you know.

[plasmajet1990]

the guy is out on a calibration... so I am stuck waiting. As soon as I get something I will let you know.

Ok.
Thank you

Ion

[Intel55]

whew.... finally, I can find two in stock. PM me for price.

There is also a conversion kit so you can use 9m tubes, somewhat expensive though.

also do you need tube only or tube and float?

[plasmajet1990]

whew.... finally, I can find two in stock. PM me for price.

There is also a conversion kit so you can use 9m tubes, somewhat expensive though.

also do you need tube only or tube and float?

Hi,

Thank you !

I need both tube and float.
If there is no float I would be content only with the tube.
Please let me know how much and where to pay.

Regards,
Ion Trusca

[Intel55]

Ok, I will PM you the contact info and price. They can get the float as well. Do you know how many you need?

[Intel55]

contact info PM'ed. They do have the float and tube. I guess they finishing up the conversion kit.

[KIAHBEAUTY]

Hi Ion,
I can supply what you require and have sent you a private e-mail with price and delivery times.

Regards Lee

Hi all,

I have a Metco 7M equipment and I need as spare part the Flowmeter tube (argon).
Has anybody some informations about where could I buy the Flowmeter tube for argon ?
At Metco it is no longer available.

Thanks,

Ion Trusca

[Intel55]

Hi Ion,
I can supply what you require and have sent you a private e-mail with price and delivery times.

Regards Lee

WTF. Did you not read the thread?

[KIAHBEAUTY]

I am sorry Intel,
did not know that the Thermalspray Community was a closed market!
I think that is was was you meant by your thread? What does WTF mean? excuse my ignorance but as you know I am new to this message board.
Am I not following the right etiquette?...
Please advise?

Lee

Hi Ion,
I can supply what you require and have sent you a private e-mail with price and delivery times.

Regards Lee



[/quote]

WTF. Did you not read the thread?

[/quote]

[Intel55]

Not a closed market. Just that when the thread has obviously been handled by one person, made the calls, got the quotes, you should ethically stay out imo. You did not break any rules or anything and you are free to compete (might have a difficult time with you being pound priced and me being USD), but it just comes across as poor taste to me, nothing more. I would not jump into a thread that had you handling requests over the course of a couple weeks and especially after you gave out contact info and quotes.
anyway no worries.


tubes + float in stock (small supply right now)
conversion kit almost completed from what I was told.
PM for contact info and price.