Metal spray
10-11-2010, 11:13 AM,
#1
Metal spray
Dear All,

I am having steel bearing housing 670mm, it was get worn out from 0.4 to 0.7mm, the standard bore size is max.670.014mm. is it strength ok if do repair with metal spray coating or if any other recommended method, please share!
NB : Bearing number 23076 (380x670x135 mm)

Thanks for all your repply,
Dedi
Reply
10-12-2010, 01:21 PM,
#2
RE: Metal spray
Hi Dedi

Yes possible to use metal spray to repair the bearing housing. I assume you would subcontract this out to a job shop?

Most likely they would use Arc Spray with a NiAl bond coat, and a 13% Chrome Steel 420 SS top layer. The thickness should be no problem at all.

Do you have your own equipment? Do you need a job shop recommendation?
Stephen James Booth
www.ipsteknokraft.com
www.teknokraft.com
Indonesia WhatsApp +6281905603262

Reply
10-13-2010, 08:22 AM,
#3
RE: Metal spray
i have tried it some time ago and found one of the finest solution Big Grin
Reply
10-20-2010, 04:18 PM,
#4
RE: Metal spray
Hi Dedi

Sign0016 to the Surface Engineering Forum.

I will echo Stephen Booth's comments.
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  Metal Spray Coating for ID Fan Impeller RV_DMG 2 3,546 04-08-2015, 06:54 PM
Last Post: Met.Eng.
  Black spots after metal spray turbo 2 5,526 12-08-2011, 02:19 PM
Last Post: Gordon
  Metal spray equipment. Please could someone advise? Ken 5 11,216 03-17-2009, 04:56 PM
Last Post: djewell
Lightning Metal Spray information incthermion 0 3,314 11-17-2008, 09:20 AM
Last Post: incthermion



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd