Maximum RPM for ARC Spray Coating
02-13-2009, 04:35 AM,
#1
Maximum RPM for ARC Spray Coating
Dear All,
I have received an enquiry to coat bearing areas of screw compressor.
Dia is around 200 mm and is running in white metal bush bearings at 5000 RPM.
Customer is aprehensive about ARC Spray and wants to try Laser Beam Welding.
Pl let me know is there any limitations regarding rotational speed.
Thanks and Regards
Vijay Deshpande
Reply
02-15-2009, 02:00 AM,
#2
RE: Maximum RPM for ARC Spray Coating
Dear Vijay,
So far Arc-spray is okay if you do the balancing before and after spraying in order to avoid from vibration during operation, since high-speed rotation need good balancing of the part.
Hope are of some helps.
Thanks & Regards,
Iwan Sedaryawan - Website : https://www.ciptaagung.com
Happy0193
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  Amdry 9951. Anyone know the maximum coating thickness Antcarroll 2 2,251 01-29-2021, 08:17 AM
Last Post: loriolo
  Maximum allowed RPM shantanu 10 7,712 11-29-2013, 04:30 PM
Last Post: Vijay Deshpande
  What's maximum pressure loading for WC10Co4Cr? deepskysea 2 6,097 09-04-2008, 10:32 AM
Last Post: deepskysea



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd