MO wire spray parameter for 3GF
04-08-2018, 03:00 AM,
#1
MO wire spray parameter for 3GF
Hello members
I want to spray molybdenum with 5K equipment
1. spray equipment ....Metco 5K flame spray
2. Coating material....3.2mm Molybdenum wire
3. Flow meter .... 3GF, 3AF

Flowmeter reading of spraying table for 2GF flowmeter
I don"t know the Setting pressure
Oxygen ....50
Acetylen....35
Air............49

I want to know the parameters When I use 3GF
Oxygen .... ? reading / ? psi
Acetylen ... ? reading/ ? psi
Air..... ? reading/ ? psi

Have a good day.
Reply
04-13-2018, 01:41 PM,
#2
RE: MO wire spray parameter for 3GF
(04-08-2018, 03:00 AM)kim jong hun Wrote: Hello members
I want to spray molybdenum with 5K equipment
1. spray equipment ....Metco 5K flame spray
2. Coating material....3.2mm Molybdenum wire
3. Flow meter .... 3GF, 3AF

Flowmeter reading of spraying table for 2GF flowmeter
I don"t know the Setting pressure
Oxygen ....50
Acetylen....35
Air............49

I want to know the parameters When I use 3GF
Oxygen .... ? reading / ? psi
Acetylen ... ? reading/ ? psi
Air..... ? reading/ ? psi

Have a good day.


Hi,

The parameters for 3GF and 2 GF are the same.

Ion
Reply
04-29-2018, 01:00 PM, (This post was last modified: 04-29-2018, 01:30 PM by kim jong hun.)
#3
RE: MO wire spray parameter for 3GF



Hi,

The parameters for 3GF and 2 GF are the same.

Ion
[/quote]

Why does this document represent the flow rate in pressure units?
[/quote]

Surface and coating technology 79(1996) 276~288
[/quote]

Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  parameter DJ GUN 2700 gito 0 860 03-26-2019, 03:28 AM
Last Post: gito
  T800 parameter Ping Cheng 2 1,553 03-14-2019, 09:56 AM
Last Post: Ping Cheng
  Oxy-fuel wire spray gun questions hje 5 2,024 01-26-2019, 05:58 PM
Last Post: plasmajet1990
  Parameter Stellite 6 HVOF DJ2600 achmadarifudinh 0 1,212 12-07-2018, 01:36 AM
Last Post: achmadarifudinh
  601NS single cathode parameter J!m 1 1,598 08-15-2016, 01:58 PM
Last Post: plasmajet1990
  Wire Flame spray and Twin Arc spraying wtaz 1 2,900 03-30-2015, 09:41 PM
Last Post: loriolo
  Hardness with Arc Spray Wire Edson 4 4,305 11-21-2014, 11:56 PM
Last Post: loriolo
  porosity in bronze wire spray KevGarty 1 2,806 07-22-2014, 01:45 AM
Last Post: shantanu
  Reduce unmelted particles in Combustion Wire Spray Alberto Villalobos 8 5,958 05-19-2014, 07:21 PM
Last Post: KevinS
  Copper wire arc spray surface roughness operator 10 8,048 09-10-2013, 09:06 AM
Last Post: Esteban
  Bonding for Wire Flame Spray using Aluminum pure wire iwan-sedaryawan 3 4,502 12-14-2012, 08:00 PM
Last Post: MichiganMan
  HVOF parameter for WCCo + CoNiCrAlY Guna 2 3,802 10-09-2012, 06:54 PM
Last Post: Spraytube
  Separation in Wire spray (Metco 405) shabisyed 3 5,829 03-13-2012, 08:44 AM
Last Post: loriolo
  Spray Wire KevGarty 2 3,378 01-29-2012, 10:52 PM
Last Post: KevGarty
  W121 coating - Parameter Problem ir_minja 1 4,417 02-21-2011, 07:25 PM
Last Post: Gordon



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd