Liquid fuel hvof testing
05-19-2015, 10:50 AM,
#1
Liquid fuel hvof testing
Liquid fuel hvof system has to be operated on standard parameters only, a little play with these may lead to something serious. Here what happened was the user reduced the carrier gas flow just to check the effects on coating & that results into back fire into nylon powder tube and its result is clearly demonstrated into this picture Happy0193 .

Later on everything went okay after small recovery action, This was just an experience to share with you all users.

Have safe operation always!!






Thanks

Jay Dev Choudhary



Attached Files Thumbnail(s)
   
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  APS and HVOF coating testing Oeno 5 4,251 02-24-2014, 09:37 PM
Last Post: KevinS
  Why Liquid fuel is better than Gas fuel in HVOF? dibyendudhara 3 10,869 12-30-2013, 02:36 PM
Last Post: derek
  applicatiion of liquid boriding alae9k 0 1,895 12-24-2012, 09:18 AM
Last Post: alae9k
  HVOF: Gas fired system Vs liquid fired system shantanu 3 6,299 06-19-2012, 04:06 PM
Last Post: Pete_F
  O2/fuel ratio changes Intel55 5 6,295 03-13-2009, 10:11 AM
Last Post: landemarre
  aluminum liquid rezabertoni 9 10,088 02-05-2009, 04:44 AM
Last Post: rezabertoni
  handling of liquid MFCs rider362 1 3,475 07-04-2008, 11:47 AM
Last Post: Gordon
  Fuel for HVOF Panf 15 18,444 02-11-2008, 04:54 PM
Last Post: Stuart Milton



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd