Life of JP 5000 Gun Parts?
11-11-2014, 08:53 PM, (This post was last modified: 11-11-2014, 08:55 PM by RV_DMG.)
#1
Life of JP 5000 Gun Parts?
Hello,

Everyone here!

There are many threads here related to this subject but very less information provided by only few limited users therefore, request all of JP 5000 users to share their practical experience about life of these parts importantly for barrels (4" & 6"), Combustion Chamber & Coaxial Stabilizer?

There are many offers we receive & all are under consideration, apart from initial cost of the system it would be important for us to know the operating cost too, major cost is involved in replacement of these parts so knowing life of these parts will play important factor in finalizing this purchase.

Barrel being the most severally worn out part will be one of the focus point, A manufacturer from India has suggest two types of barrel - standard & custom coated (long life barrel), does anybody have idea about these two qualities & what is the actual life differences between both?



Thanks in advance

Reply
11-12-2014, 06:40 PM, (This post was last modified: 11-12-2014, 06:41 PM by Edson.)
#2
RE: Life of JP 5000 Gun Parts?
I have past experience in my early company, previously use simple copper barrel & later got this long life custom coated barrel which increased life! I am not good enough with JP system so do not know life of other parts Sad may be some body with experience can tell you.


Cheers

Dany
Reply
11-12-2014, 08:56 PM,
#3
RE: Life of JP 5000 Gun Parts?
If you are looking at life cycle costs, you should also look at HVAF guns. They can provide the same or better coating quality as a JP5000, but the gun parts last a lot longer. Typically, I hear a JP barrel (nozzle) lasts 8-16 hours. An HVAF nozzle by contrast will go 200-300 hours. There is also the issue of powder consumption. I have seen my customers reduce powder consumption 25-50% when they switch from JP to HVAF.
Reply
11-13-2014, 04:26 PM,
#4
RE: Life of JP 5000 Gun Parts?
hi
attached you will find document to make your gun parts life longer

there are many conception errors on jp 5000

if you can t have 50 hours coating for one barrel you can contact me

hvofhamid@hotmail.fr
factories providers know defaults ,but they don t like to correct them
best regards



Attached Files
.pdf   brevet d invention français (4).pdf (Size: 360.23 KB / Downloads: 863)
Reply
11-13-2014, 06:06 PM,
#5
RE: Life of JP 5000 Gun Parts?
(11-13-2014, 04:26 PM)hvofhamid Wrote: hi
attached you will find document to make your gun parts life longer

there are many conception errors on jp 5000

if you can t have 50 hours coating for one barrel you can contact me

hvofhamid@hotmail.fr
factories providers know defaults ,but they don t like to correct them
best regards


Dear HvofHamid,

Your claim for longer life of parts is good but in this document I can not understand any thing due to different language & also I cann't convert it into english language!

Can you tell us in brief what this paper is all about & what is the method inside which claim such a longer life of these parts?


Thanking you

Dany
Reply
11-14-2014, 03:33 PM,
#6
RE: Life of JP 5000 Gun Parts?
hi Daniel
search my archives in the forum ,you will find discussions about this subject and the methode to make your gun parts life longer

best regards

hamid
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  Metco Wokajet & Tafa JP 5000 Parts RV_DMG 2 4,707 12-18-2015, 08:19 AM
Last Post: RV_DMG
  JP 5000 Instruction Manual RV_DMG 0 6,033 11-25-2014, 03:45 PM
Last Post: RV_DMG
  JP 5000 Type System Chiller Power Supply Edson 4 6,061 11-13-2014, 07:45 AM
Last Post: Parat Tech
  JP 5000 RV_DMG 3 5,034 10-07-2014, 12:39 PM
Last Post: RV_DMG
Sad Stoichiometric ratio calculation for JP 5000 Lalit 3 6,915 06-13-2013, 07:33 PM
Last Post: Intel55
Information Chrome oxide thermal sprayed coatings shelf life Leanne 1 4,404 02-14-2013, 02:18 PM
Last Post: Gordon
  HVOF Barrel Life Span sreenuvundela 4 7,281 11-10-2012, 11:33 AM
Last Post: Rohit Upadhyaya
  DJ2600 Injector life pakalano 22 23,585 10-19-2012, 03:39 PM
Last Post: pakalano
  parts during life torch hvofhamid 10 12,120 05-29-2012, 06:16 PM
Last Post: Gordon
  JP 5000 spray issue mehongbo 1 4,936 02-04-2011, 03:36 PM
Last Post: derek
  Surface preparation and its effect on fatigue life and bond strength WMW 4 8,881 06-29-2010, 08:41 AM
Last Post: drramc
  Jet Kote nozzle life plyer 8 13,456 05-15-2009, 02:30 PM
Last Post: plyer



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd