Jet Kote O2 and H2 supply pressure requirements?
06-24-2009, 06:06 PM,
#1
Jet Kote O2 and H2 supply pressure requirements?
What gas supply flows and pressure requirements are you using for the Jet Kote.

Someone was telling me O2 was 0-25 bar!!! and 3200scfh!!! and a 3/4" pipe.

They also had the H2 supply of 0-18 bar and 3200scfh (1500nlpm).

That sounds high to me. Most I have ever seen them run is 2100scfh.


anyway... can someone with JK experience enlighten me Smile

Thanks
Reply
06-26-2009, 03:32 PM,
#2
RE: Jet Kote O2 and H2 supply pressure requirements?
ok hmmm so I need 10 bar supply of H2 and 17 bar supply of the O2. Smile
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  Hopper Pressure Lower than Gun Pressure devinrist 4 5,280 01-03-2016, 05:45 AM
Last Post: Johnny_Blaze
  Pressure Regulators? Edson 3 3,205 01-03-2016, 05:32 AM
Last Post: Johnny_Blaze
  Jet kote gun leakage problem Hector Monjardin 0 2,253 11-18-2015, 04:24 PM
Last Post: Hector Monjardin
  JP 5000 Type System Chiller Power Supply Edson 4 4,893 11-13-2014, 07:45 AM
Last Post: Parat Tech
  Stellite Jet Kote - Green flame? farmcop1 4 5,629 05-29-2012, 07:25 PM
Last Post: farmcop1
  safety requirements Arturas 3 3,936 05-14-2012, 02:49 PM
Last Post: alonzomerrill
  Arc spraying: air quality requirements Stefan 2 3,840 11-24-2011, 10:19 AM
Last Post: Stefan
  85/15 Zn/Al pressure vessel coating spencew 5 7,548 04-01-2011, 06:28 PM
Last Post: MichiganMan
  Peel of coating during pressure testing raviswanadha 6 7,961 01-14-2011, 08:49 PM
Last Post: Gordon
  Jet kote III orthogonal spray parameters query wangqun72 6 7,852 09-05-2010, 05:57 AM
Last Post: k09
  The ratio of oxygen to fuel of Jet kote III wangqun72 5 8,428 09-02-2010, 06:18 PM
Last Post: wangqun72
  Jet Kote nozzle life plyer 8 11,595 05-15-2009, 02:30 PM
Last Post: plyer
  Jet Kote water inlet temp... Intel55 4 6,625 03-19-2009, 10:53 PM
Last Post: Gordon
  Calculating powder requirements Intel55 5 6,697 12-01-2008, 02:56 PM
Last Post: Intel55
  What's maximum pressure loading for WC10Co4Cr? deepskysea 2 5,273 09-04-2008, 10:32 AM
Last Post: deepskysea



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd