Login

hustzc · 04-09-2015, 02:08 AM,

Hi, dear all:

We intend to buy a new thermal spraying system. Could you anyone tell me which one is a better (JP8000 and DJ2600) HVOF system ? i.e., stucture, bonding strength for metallic coatings.

Thanks

regards
cheng

djewell · 04-09-2015, 07:41 PM,

Is there any reason you would not consider an HVAF system? It will give you the same or better coating quality with a much lower operating cost. HVAF guns are air cooled, so there is no chilled water system to maintain. Additionally, HVAF gun parts last more than 10 times longer than HVOF gun parts.

Login
Username:
Password:	Lost Password?
	Remember me

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	NiCrBSi coating by DJ2600	Zhao Yun	6	2,000	12-05-2022, 03:43 AM Last Post: Zhao Yun
	Spark Issue on DJ2600 HVOF Flame	xxxxmgulkokan	3	2,607	08-31-2022, 03:15 PM Last Post: Red Baron
	Corrosion Problem on HVOF Coating (DJ2600 Metco Gun)	xxxxmgulkokan	5	3,122	04-03-2022, 12:45 PM Last Post: sprayjet
	Corrosion or Contamination on JP8000	xxxxmgulkokan	2	1,560	03-26-2022, 06:33 AM Last Post: RAY SENFENG
	Parameter Stellite 6 HVOF DJ2600	achmadarifudinh	0	2,967	12-07-2018, 01:36 AM Last Post: achmadarifudinh
	HVOF DJ2600 DJ8W powder feeder issue	vetrinit	5	9,139	06-17-2015, 04:39 PM Last Post: loriolo
	DJ2600 Injector life	pakalano	22	25,793	10-19-2012, 03:39 PM Last Post: pakalano
	Diificulty in getting <1% porosity on a DJ2600 hybrid	Intel55	3	7,525	11-21-2007, 05:59 PM Last Post: Gordon