JP 5000 spray issue
02-03-2011, 10:58 PM,
#1
JP 5000 spray issue
Hi there,

I have an issue needs opinon from experts who have JP5000 experience.

My setting was 1600SCFH O2 (14 bar) and 6 gal/h Jet-A Kerosene coating MCrAlY powder. The gun sometimes spit black oily dirt onto coating parts. I feel that probably the O2 was not rich enough. Stabilizer was OK.

Regardless what type of system I use, What is your opinon on what you see.

Many thanks in advanceSmile

Reply
02-04-2011, 03:36 PM,
#2
RE: JP 5000 spray issue
Jet-A have something added in to stop icing, try the different fuel.
Leaks check your O2 supply hose.
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  16C-NS cracking issue kyuntak 31 3,934 08-04-2021, 02:43 AM
Last Post: Stephen Booth
  8YSZ via F4-MBX porosity issue firegod 3 3,201 12-30-2019, 03:35 PM
Last Post: loriolo
  IRC5 ABB robot issue demionkrishan 0 1,005 09-19-2019, 04:21 PM
Last Post: demionkrishan
  Metco Wokajet & Tafa JP 5000 Parts RV_DMG 2 3,443 12-18-2015, 08:19 AM
Last Post: RV_DMG
  JP 5000 Instruction Manual RV_DMG 0 4,157 11-25-2014, 03:45 PM
Last Post: RV_DMG
  Life of JP 5000 Gun Parts? RV_DMG 5 6,026 11-14-2014, 03:33 PM
Last Post: hvofhamid
  JP 5000 Type System Chiller Power Supply Edson 4 4,767 11-13-2014, 07:45 AM
Last Post: Parat Tech
  JP 5000 RV_DMG 3 3,793 10-07-2014, 12:39 PM
Last Post: RV_DMG
  Test Coupon Issue SSC 8 7,435 11-08-2013, 03:13 PM
Last Post: djewell
Sad Stoichiometric ratio calculation for JP 5000 Lalit 3 5,434 06-13-2013, 07:33 PM
Last Post: Intel55
  Cracking issue with NiCrSiB divanis 3 5,708 06-14-2011, 09:20 AM
Last Post: Frantisek
  About Hardness issue of PAC 6CO by Metco 9MB Gun Amanda 12 12,992 02-03-2009, 12:39 PM
Last Post: adam wintle



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd