Inconel 625 or NiAl 95/5
08-05-2015, 09:47 AM,
#1
Inconel 625 or NiAl 95/5
dear all,
does everyone has any experience using Inconel 625 or NiAl 95/5 for covering the Copper plate with 1250deg C temperature ? in Copper Smelting factory
best regards
iwan sedaryawan ca
Thanks and regards,
Iwan Sedaryawan | Director Cipta Agung CV | HP : +62 (0) 818504137 - 81357725946-08117019540 - | PIN BB : 2AD850B7| Skype : iwan.sedaryawan |Email : sedaryawan@ciptaagung.com | sedaryawan@yahoo.com | sedaryawan@gmail.com | Web-site : https://www.ciptaagung.com
Reply
08-06-2015, 10:49 AM,
#2
RE: Inconel 625 or NiAl 95/5
Hi Iwan
Inconel 625 can be used for temperatures up to 920 °C, and NiAl 95/5 can tolerate oxidizing atmospheres at temperatures up to 650°, so if the working temperature is about 1250 °C, both coatings are not indicated for this application.
Best regards
Luigi
Reply
09-25-2015, 10:21 AM,
#3
RE: Inconel 625 or NiAl 95/5
Hi Ewan,

Why do you want to use Ni/Al or Inconel 625?

regards,
Joris


Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  Inconel 625 Plasma Sprayed Compressor Cylinder (ID) demionkrishan 4 1,174 06-17-2019, 01:32 PM
Last Post: demionkrishan
  Hardness of Inconel 625 after ground demionkrishan 3 1,834 05-06-2018, 12:28 PM
Last Post: demionkrishan
  NiAl arc spray vs NiAl plasma CHI3 1 1,912 07-01-2016, 05:11 PM
Last Post: Vadim Verlotski
  Loading of Barrel when spraying Inconel 625 Bob Weber 11 7,164 12-31-2014, 08:52 AM
Last Post: Bob Weber
  F4 Gun+Tristar+muticoat+inconel 718+unmelted Bler 0 2,272 07-20-2012, 07:32 AM
Last Post: Bler
  Inconel 625 - JP5000 SDA 7 8,212 12-28-2011, 06:54 PM
Last Post: djewell
  Hardness of Inconel 625 Met.Eng. 2 10,986 08-29-2011, 09:32 AM
Last Post: Met.Eng.
  Inconel 625 coating on flange surface gops123 5 11,041 04-05-2011, 01:54 PM
Last Post: Stuart Milton



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd