How to interpret the result of
01-19-2021, 03:21 AM,
 Hoon Lee Junior Member Posts: 3 Threads: 2 Joined: Jan 2021 Reputation: 0
How to interpret the result of
Hello I'm Hoon and I have a question.

I tested some specimens following ASTM C633 method.

And one of the specimens looks like the picture I attached.
https://imgur.com/ngHRwlm
The value of tensile strength is 25.660MPa

and How do I interpret this result?

1. Some of surface still attached around 20%? So, I can assume the total strength is around 31MPa
2. Nope. No matter the rest attached or not, The tensile strength is 25.660MPa

It can be poor question, but I need your help.
01-19-2021, 11:33 AM,
 Vadim Verlotski SuperMember Posts: 227 Threads: 0 Joined: Sep 2014 Reputation: 13
RE: How to interpret the result of
(01-19-2021, 03:21 AM)Hoon Lee Wrote: Hello I'm Hoon and I have a question.

I tested some specimens following ASTM C633 method.

And one of the specimens looks like the picture I attached.
https://imgur.com/ngHRwlm
The value of tensile strength is 25.660MPa

and How do I interpret this result?

1. Some of surface still attached around 20%? So, I can assume the total strength is around 31MPa
2. Nope. No matter the rest attached or not, The tensile strength is 25.660MPa

It can be poor question, but I need your help.

Correct answer is the second: "No matter the rest attached or not, The tensile strength is 25.660MPa"
01-20-2021, 12:29 AM, (This post was last modified: 01-20-2021, 12:29 AM by Hoon Lee.)
 Hoon Lee Junior Member Posts: 3 Threads: 2 Joined: Jan 2021 Reputation: 0
RE: How to interpret the result of
(01-19-2021, 11:33 AM)Vadim Verlotski Wrote: Correct answer is the second: "No matter the rest attached or not, The tensile strength is 25.660MPa"