High-temperature polymers (PEEK) spraying by HVOF
02-19-2016, 11:53 AM, (This post was last modified: 02-20-2016, 07:16 AM by Stanislav.)
#1
Question  High-temperature polymers (PEEK) spraying by HVOF
Hello,
I had read the article, where was about successfully spaying of PEEK (polyetheretherketone, polymer of Victrex production) by HVOF (K2 Gun). At the last week I tried to do the same, was using parameters with low velocity and temperature of stream, but coating was horrible burned. The spray parameters that I used was: oxygen 17 L/h, kerosene 600 L/min, powder supply 15g/min.
I think the problem of polymer overheating is in too long time interaction of polymer powder with high temperature of stream.
Has somebody tried to spray high-temperature polymers by using HVOF guns (K2/Diamond Jet/Other)? May be you know some Ā«cheatsĀ» or appropriate parameters?
P.S. I have some idea that consists in changing of injection method: radial supply of powder from the side of top of nozzle (like it doing in plasma).

Any replies or tips would be greatly appreciated.

Thank you.
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  Hvof spraying on top of arc spray velocity 7 1,769 07-04-2019, 06:03 PM
Last Post: velocity
  High temperature sealers for food contact pcdmt 3 2,082 04-25-2019, 12:28 PM
Last Post: loriolo
  HVOF/HVAF Thermal Spraying connoramcguigan 0 1,093 11-13-2018, 05:13 PM
Last Post: connoramcguigan
  YSZ thermal Spraying by HVOF and Flame mgbaca1a 2 1,135 09-24-2018, 08:57 PM
Last Post: mgbaca1a
  Polymers plasmajet1990 1 1,987 05-24-2016, 02:13 PM
Last Post: Stanislav
  Diamater of HVOF spraying Gun? hustzc 0 1,729 11-12-2014, 09:52 AM
Last Post: hustzc
  hvof sleeve spraying Brent 4 4,179 03-06-2013, 07:41 AM
Last Post: Brent
  metalization of solar high temperature absorber pipes nikoslarissis 5 5,534 01-03-2012, 04:57 AM
Last Post: sreenuvundela
  High Pressure Piston Rods HVOF coatings HVoilF 14 20,572 12-24-2011, 10:20 AM
Last Post: k09
  high temp during hvof coating ehsan 6 10,787 07-05-2011, 03:25 PM
Last Post: Justin
  Temperature control in spraying HVOF minh_8888 1 3,632 06-21-2011, 02:40 PM
Last Post: Met.Eng.
  Surface preparation before spraying HVOF minh_8888 4 7,400 06-20-2011, 12:18 PM
Last Post: Met.Eng.
  Temperature HVOF Process ir_minja 2 5,366 10-04-2010, 08:23 AM
Last Post: Gordon
  HVOF Small-ID Spraying ykang 10 11,921 10-27-2009, 04:37 PM
Last Post: k09
  Copper protection against high temperature corrosion hgjor 1 6,031 05-10-2008, 02:07 PM
Last Post: Gordon



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd