High Temp Adhesive for TSA Adhesion test
06-30-2011, 10:26 AM,
#1
High Temp Adhesive for TSA Adhesion test
Colleagues,

Can anyone recommend an adhesive for adhesion testing - bond strength no more than 20MPa that can be used on a high temp (300oC), in service process vessel. Current adhesive (Araldite) cures too fast to provide enough bond strength.
Reply
07-17-2011, 06:30 PM,
#2
RE: High Temp Adhesive for TSA Adhesion test
Hi wrjordan

I think 300 C is probably well above the service temperatures of majority of bond strength testing adhesives.

I can only suggest trying one of the 'one part' epoxy adhesives that normally require oven curing Wink in your case it won't need the oven.
Reply
07-18-2011, 02:04 AM,
#3
RE: High Temp Adhesive for TSA Adhesion test
(07-17-2011, 06:30 PM)Gordon Wrote: Hi wrjordan

I think 300 C is probably well above the service temperatures of majority of bond strength testing adhesives.

I can only suggest trying one of the 'one part' epoxy adhesives that normally require oven curing Wink in your case it won't need the oven.

Thanks. I had a recommendation for 3M Scotchweld 2214 which is a 1 part epoxy as you suggest. The user says it works ok, however, the glue has to be kept in a fridge (<3C) which makes it a lot of fun to use in a refinery in Asia - think remove from fridge, take (walking) to site, climb up scaffolding, set test dolly, climb back down scaffolding, walk back to fridge all in 35C / 80% humidity, wearing full PPE!
Reply
07-22-2011, 06:51 PM,
#4
RE: High Temp Adhesive for TSA Adhesion test
300C even tests the limits of the high temp epoxies. I can't say that I've ever had to get into testing at these kind of temps., but if you find you are getting a lot of cohesive failures within the adhesive layer, then you may have to look into more complex chemistries. Try the epoxy first, and failing that you may need to look into inorganics or organic-inorganics like polysiloxanes.

Good luck.
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  Each pass thickness & interpass temp. confused velocity 41 9,345 07-19-2020, 04:17 PM
Last Post: DMan
  anti-adhesive, low friction coating teresa.rodriguez 5 2,279 07-17-2017, 07:59 PM
Last Post: plasmajet1990
  Adhesion testing MartinFe 2 3,072 05-04-2015, 01:49 PM
Last Post: djewell
  Adhesion to Shot Peened Titanium ServiceTech 1 2,701 02-10-2014, 10:48 PM
Last Post: KevinS
  Adhesive/sealer David Jones 0 2,432 03-20-2012, 05:26 PM
Last Post: David Jones
  How can adhesion of Gold Germanium alloy on GaAs substrate be improved??? xoobiii 0 3,026 02-21-2012, 12:09 PM
Last Post: xoobiii
  high temp during hvof coating ehsan 6 10,787 07-05-2011, 03:25 PM
Last Post: Justin
  Titanium adhesion Superspray 2 3,854 06-27-2011, 03:23 PM
Last Post: Superspray
  Non-stick and adhesion properties of coatings qwerty 2 5,966 12-15-2010, 06:46 AM
Last Post: ives
  Jet Kote water inlet temp... Intel55 4 5,956 03-19-2009, 10:53 PM
Last Post: Gordon
  bond test adhesive Madila Awalini 0 6,295 07-12-2006, 07:38 AM
Last Post: Madila Awalini



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd