High Carbon Iron Based Wire proporties (Metco 8222)
04-28-2014, 06:26 PM,
#1
High Carbon Iron Based Wire proporties (Metco 8222)
Hi members,

We are planing to spray Metco 8222 for hard crome alternative and buld up coatings.
Is any body spray this wire with electric arc spray system? I am pleased if you answer these questios soon.

1-What is the max thicknesses ?
2-What is the boanding proporties?
3-Can we apply this wire without bond coat? (With grit blasting and maybe do other surface preparation steps)
4-What is the max hardnesses about this wire?

Best regards Good days Smile
Reply
05-01-2014, 01:22 PM,
#2
RE: High Carbon Iron Based Wire proporties (Metco 8222)
Hi Metallurgy_eng

1. I think probably in excess of 2mm

2/3. Not sure on value, but we sprayed without bond coat onto well prepared substrates with no problems.

4 If I remember correctly (it was nearly 15 years ago) it was very hard 1000+ HV/0.3.
Reply
05-02-2014, 10:55 PM,
#3
RE: High Carbon Iron Based Wire proporties (Metco 8222)
Hmm ı check the bulltein the max thichness is 5 mm, the bond is 9500 mpa and telling self bonding proporties. The hardness is 48-50.

But thank you ur helping.

Good daysss
Reply
05-03-2014, 08:49 AM,
#4
RE: High Carbon Iron Based Wire proporties (Metco 8222)
(04-28-2014, 06:26 PM)Metallurgy_eng Wrote: Hi members,

We are planing to spray Metco 8222 for hard crome alternative and buld up coatings.
Is any body spray this wire with electric arc spray system? I am pleased if you answer these questios soon.

1-What is the max thicknesses ?
2-What is the boanding proporties?
3-Can we apply this wire without bond coat? (With grit blasting and maybe do other surface preparation steps)
4-What is the max hardnesses about this wire?

Best regards Good days Smile

Hi,

1-What is the max thicknesses ? ………...>5 mm
2-What is the boanding properties?………..=65Mp (>9500 psi)
3-Can we apply this wire without bond coat? (With grit blasting and maybe do other surface preparation steps)……….Yes
4-What is the max hardnesses about this wire?………..1300 HV

Ion
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  High Carbon Steel - Ammonia corrosion thorgrim 1 1,766 05-23-2021, 12:45 PM
Last Post: Vadim Verlotski
Star HVOF WCCo on Chilled Cast Iron(55HRC) tobjung 1 2,094 03-04-2021, 11:16 AM
Last Post: Vadim Verlotski
  Want consumables for Metco 16E combustion wire system. Turbo Machinery 0 1,922 06-07-2019, 12:11 PM
Last Post: Turbo Machinery
  Good preparation for cast iron base material plzc126330 3 4,168 11-24-2016, 01:17 AM
Last Post: plzc126330
  Cast iron restoring sprayloud 1 3,200 04-11-2016, 12:54 AM
Last Post: aerotherm
Question Brown aluminum oxide VS Chilled iron grit Bacon 2 4,788 03-27-2015, 06:23 PM
Last Post: Bacon
  Cast iron powder or wire M.Naguib 4 6,124 12-08-2013, 12:14 AM
Last Post: kschewe
  Separation in Wire spray (Metco 405) shabisyed 3 7,336 03-13-2012, 08:44 AM
Last Post: loriolo
  Who can tell me how to spray on carbon? lifei 10 10,990 12-21-2011, 05:55 PM
Last Post: joyee
  Metco ALuminum SF wire speed M.Naguib 1 5,322 12-17-2010, 12:56 PM
Last Post: Gordon
  HVOF on CAST IRON ROLL Guna 1 5,801 10-04-2010, 07:37 AM
Last Post: Gordon
  PTA Powder Composition for Cast Iron Stephen Booth 2 5,794 11-30-2009, 12:05 PM
Last Post: drramc
  twin wire arc spraying equipment for stainless steel wire, monel wire, etc. technovel 6 12,775 08-01-2008, 11:59 AM
Last Post: adam wintle
  Fusing of cast iron Arturas 1 6,966 08-16-2006, 01:23 PM
Last Post: Gordon



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd