Hello! From A New Member

[Wascator]

Hello! I am an engineer of some experience, working mostly with older large industrial gas engines and compressors. I joined because I am interested in issues involving correct reBabbitting of old bearings and I hoped to find some expertise and advice here.
Plus: there is bound to be some interesting reading here, for the middle-aged nerdy engineer!
I would also be happy to assist in any I can with a problem another member has.

[Gordon]

Hi Wascator

to the Surface Engineering Forum.

[Ating]

Hello,
My Name is Ating, from Indonesia.
I'm new member, and experience in thermal spray technology such as arc spray, HVOF and now is learning for ceramic coating and heat treatment.

Hopefully by joining this forum, I can enlarge my network, sharing my knowledge and getting a lot input about surface technology and engineering.

Best Regards,
Ating K

[Stephen Booth]

Hello Ating,

Welcome to the group. Contact to me or Wahyu off line, we are both in Indonesia....

stephen.booth@fst.sg or wahyu@fst.sg

we have a bit of experience also with Thermal Spray.

[Laurent]

Hello! I am an engineer of some experience, working mostly with older large industrial gas engines and compressors. I joined because I am interested in issues involving correct reBabbitting of old bearings and I hoped to find some expertise and advice here.
Plus: there is bound to be some interesting reading here, for the middle-aged nerdy engineer!
I would also be happy to assist in any I can with a problem another member has.

Hello and welcome Wascator
Also Engineering repairs on piece parts from Auxillary Power Units, such as Honeywell, Hamilton Sundstrand and Pratt and Whitney.
We currently are implementing existing repairs but also developing new repairs.
We use plasma spray, welding and vacuum treatment, machining.