Hello! From A New Member
08-19-2014, 07:55 PM,
#1
Hello! From A New Member
Hello! I am an engineer of some experience, working mostly with older large industrial gas engines and compressors. I joined because I am interested in issues involving correct reBabbitting of old bearings and I hoped to find some expertise and advice here.
Plus: there is bound to be some interesting reading here, for the middle-aged nerdy engineer!
I would also be happy to assist in any I can with a problem another member has.
Reply
08-20-2014, 01:43 AM,
#2
RE: Hello! From A New Member
Hi Wascator

Sign0016 to the Surface Engineering Forum.
Reply
08-20-2014, 08:34 AM,
#3
RE: Hello! From A New Member
Hello,
My Name is Ating, from Indonesia.
I'm new member, and experience in thermal spray technology such as arc spray, HVOF and now is learning for ceramic coating and heat treatment.

Hopefully by joining this forum, I can enlarge my network, sharing my knowledge and getting a lot input about surface technology and engineering.

Best Regards,
Ating K
Reply
08-27-2014, 02:42 AM,
#4
RE: Hello! From A New Member
Hello Ating,

Welcome to the group. Contact to me or Wahyu off line, we are both in Indonesia....

stephen.booth@fst.sg or wahyu@fst.sg

we have a bit of experience also with Thermal Spray.
Reply
09-15-2014, 09:28 AM,
#5
RE: Hello! From A New Member
(08-19-2014, 07:55 PM)Wascator Wrote: Hello! I am an engineer of some experience, working mostly with older large industrial gas engines and compressors. I joined because I am interested in issues involving correct reBabbitting of old bearings and I hoped to find some expertise and advice here.
Plus: there is bound to be some interesting reading here, for the middle-aged nerdy engineer!
I would also be happy to assist in any I can with a problem another member has.

Hello and welcome Wascator
Also Engineering repairs on piece parts from Auxillary Power Units, such as Honeywell, Hamilton Sundstrand and Pratt and Whitney.
We currently are implementing existing repairs but also developing new repairs.
We use plasma spray, welding and vacuum treatment, machining.
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  New Member ewcommunity 0 1,751 07-22-2019, 08:08 AM
Last Post: ewcommunity
  New member steve_d 0 2,126 11-05-2017, 10:08 AM
Last Post: steve_d
  New Member Jord-E 0 2,480 03-17-2017, 08:40 PM
Last Post: Jord-E
  New Forum-Member based near Berlin Christian_B 1 3,095 02-23-2017, 05:55 AM
Last Post: plasmajet1990
  Member Survey Gordon 93 101,156 07-19-2016, 09:49 PM
Last Post: RogerMilam
  A New Member Introduce Here Agili Ron 0 2,862 10-17-2012, 11:11 AM
Last Post: Agili Ron



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd