Hearth roll coating
10-02-2017, 04:03 AM,
#1
Hearth roll coating
Hello members, Have a good day.
I am looking for the right ingredients for the hearth roll coating.
Hearth roll in galvanizing line(CGL) has different tempetature and usage characteristics for each section.
I would like to know the coating materials and coating equipment(HVOF,APS,etc) suitable for temperature and use characteristics of each section( wear, oxidation resistance, Manganese build up resistance,etc) for furnace.
In addition, What kind of atmosphere is used in the hearth roll of LCO-17 of PRAXAIR?
Reply
10-03-2017, 07:21 AM,
#2
RE: Hearth roll coating
Hi, Kim Jong Hun

Do you mean hearth roll for continuous annealing?
or rolls for CGL?

LCO-17 is used for build-up protection of annealing rolls. Spraying on the air.

Best Regards,
Vig
Reply
10-12-2017, 09:11 AM,
#3
RE: Hearth roll coating
Hi Vig
Thank you for answer.
Hearth rolls are used in annealing lines.
Cr3C2, MCrAlY(M=Co,Ni) base compositions are alse used as coating materials.
Do you know what kind of atmosphere is used?
I want to know if there are any materials to use as a substitute for LCO-17
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  Ra value 1.6 to 1.7┬ÁM in CGL POT Stabilizer roll Packiaraj Mutharasu 3 1,079 02-28-2020, 08:44 AM
Last Post: Vadim Verlotski
  bridal roll coating rmsengineering 0 744 12-15-2019, 02:31 PM
Last Post: rmsengineering
  chrome oxide coating failure - 24" dia. steel roll rconnor 3 5,615 07-10-2012, 02:37 PM
Last Post: loriolo
  sealer for sink roll coating karunanidhi 17 21,225 05-01-2011, 08:32 AM
Last Post: dadasotare
  Conductor Roll -- Copper Coating Stephen Booth 3 8,004 02-27-2010, 04:52 AM
Last Post: Stephen Booth



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd