Hardness tester 2
07-20-2011, 12:24 PM,
#1
Hardness tester 2
Does anyone know if there are any standards for testing the hardness of carbide tool inserts?
Reply
07-21-2011, 03:06 PM,
#2
RE: Hardness tester 2
The standards related to hardness testing are related to the test procedure, not so much for the end product. You should test the hardness with an appropriate tester and report it with the test method. For instance, the hardness could be 1,200 HV300 which would indicate a hardness of 1,200 Vickers when tested with a 300 gram load. If your customer requires a specific hardness, they must specify which test/scale they want you to use.
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  Vickers Hardness Tester ruudlam 0 3,491 09-13-2013, 02:22 PM
Last Post: ruudlam
  pencil hardness and tukon hardness test transit 6 16,401 10-04-2012, 02:15 PM
Last Post: bruisjem
  Suggest on coating bond strength tester feifei0609 3 4,192 08-14-2012, 03:10 PM
Last Post: feifei0609
  hardness tester Arturas 1 4,308 07-17-2011, 06:18 PM
Last Post: Gordon
  Dating gun barrel with hardness tester? Possible? larry55 2 5,472 11-06-2009, 05:39 PM
Last Post: larry55
Question microhardness tester problem xara4 1 3,458 09-24-2008, 07:03 PM
Last Post: Gordon
  Sheffield Micro Vickers Hardness Tester... gnomon 3 7,407 04-16-2008, 04:21 PM
Last Post: Gordon



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd