Hardfacing shredder blades ??
11-23-2017, 09:05 PM,
#1
Hardfacing shredder blades ??
Hi..
Hoping someone can help me with a bit of info.
I hardface shredder blades, abro 400 base. I layer HF600 wire with mig, they get ground to final shape, I retip with same wire every few months,
I've been thinking about using tig to retip with a stellite rod. Or a cobolt based rod, what im worried about is the difference in how brittle it is and the chances of breaking off.

Or are there better options?

The shredder is a Shredtech st100 processing rubber only.

Many thanks in advance.
Reply
06-26-2018, 08:07 AM,
#2
RE: Hardfacing shredder blades ??
To increase impact resistance and wear resistance you can use oxy acetylen method and use 60 wc 40 nicrbsi. If rubber contains wires or steel particules it may not work but for toughness oxyacetylen melted wc particules has best resistance in nickel matrix as crack free deposit. For cheaper solutions you can use v contained mma electrodes.
So for me higher heat input is better. OxyAcetylen > mma > tig then mig
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  Gas Turbine Blades HVOF Coating masking demionkrishan 7 4,659 01-17-2018, 01:09 AM
Last Post: Taz
  opening blocked cooling holes in Stage 1 gas turbine blades Gustavo Woltmann 1 1,621 03-07-2017, 08:27 AM
Last Post: loriolo
  opening blocked cooling holes in Stage 1 gas turbine blades demionkrishan 1 1,761 03-04-2017, 07:44 AM
Last Post: loriolo
  turbine blades and vanes HVOF appliaction anne 4 2,775 12-02-2016, 05:54 PM
Last Post: demionkrishan
  Stellite Hardfacing test guru2707 4 12,485 06-04-2012, 01:03 PM
Last Post: Aseem
  Cutting blades for paper industry Met.Eng. 8 6,260 10-18-2010, 10:00 PM
Last Post: Met.Eng.
  Hardfacing Powder making bubbles in the cord attin 5 4,731 09-07-2010, 12:57 AM
Last Post: Simon Kim
  Hardfacing nickel based powders to AISI 431 Stainless Steel attin 10 12,891 04-28-2009, 02:26 PM
Last Post: djewell



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd