HVOF machine
08-26-2014, 08:05 PM,
#1
HVOF machine
Hi guys,

does anybody have experience with HVOF system eGun? I am looking for some reliable HVOF system. What HVOF system you can recommend me?
Reply
08-27-2014, 02:37 AM,
#2
RE: HVOF machine
Michael, that is a very broad question, try to be a bit more specific what you want to do, what coating you want to achieve, materials used, etc,

There are many experts on this site that are very experienced, and knowledgeable.
Reply
08-29-2014, 02:30 PM,
#3
RE: HVOF machine
Do you absolutely have to have an HVOF system? An HVAF system will spray the same materials at a faster rate with greater reliability and at a lower cost. HVAF will also be simpler to set up and maintain.
Reply
08-29-2014, 03:30 PM,
#4
RE: HVOF machine
HVAF investmet is too hıgh
Reply
08-29-2014, 04:15 PM,
#5
RE: HVOF machine
(08-29-2014, 03:30 PM)Metallurgy_eng Wrote: HVAF investmet is too hıgh

I have found HVAF investment to be much lower than HVOF. The real cost to consider is operation. HVAF is much cheaper to operate. I have seen cases where HVAF cost 75% less to operate than HVOF and applies coatings in 75% less time.
Reply
08-30-2014, 06:20 PM,
#6
RE: HVOF machine
(08-29-2014, 04:15 PM)djewell Wrote:
(08-29-2014, 03:30 PM)Metallurgy_eng Wrote: HVAF investmet is too hıgh

I have found HVAF investment to be much lower than HVOF. The real cost to consider is operation. HVAF is much cheaper to operate. I have seen cases where HVAF cost 75% less to operate than HVOF and applies coatings in 75% less time.

What about the air comp? 75/100 HP Happy0193
Reply
09-01-2014, 07:39 AM, (This post was last modified: 09-01-2014, 07:59 AM by Stephen Booth.)
#7
RE: HVOF machine
Seems and interesting topic. I would rather own a large compressor (that can be used for many things, blasting, tools, etc and easy to sell and replace) than to own a 90-135 KW chiller (needed to run a Kerosene LF HVOF).

Also seems good to save $$$ on Oxygen consumption and investment, and relatively easy to source Propane gas for the HVAF. .... Seems like a good deal to me on paper, in practice ?
(08-26-2014, 08:05 PM)michael86 Wrote: Hi guys,

does anybody have experience with HVOF system eGun? I am looking for some reliable HVOF system. What HVOF system you can recommend me?

In any case, to answer what we can from your question, if you select a gas fuel torch, based on the DJ 2700, and a flowtube controller, and simple powder feeder, that is a good starting point for the low end of an HVOF system.

Going up from there, you can keep the DJ 2700 torch, but upgrade the controller with Mass Flow, and electronics.

Or Alternatively the Liquid Fuel Torches and controllers, ...



Reply
09-18-2014, 09:46 AM, (This post was last modified: 09-18-2014, 09:47 AM by Boris Eizner.)
#8
RE: HVOF machine
(08-26-2014, 08:05 PM)michael86 Wrote: Hi guys,

does anybody have experience with HVOF system eGun? I am looking for some reliable HVOF system. What HVOF system you can recommend me?


Reply
09-19-2014, 12:08 PM,
#9
RE: HVOF machine
(08-26-2014, 08:05 PM)michael86 Wrote: Hi guys,

does anybody have experience with HVOF system eGun? I am looking for some reliable HVOF system. What HVOF system you can recommend me?

Hi Michael,

We can offer you Gas Fuel HVOF system Model Hipojet-2700 M. THis is economical and you can use LPG as fuel. YOu may visit our website www.mecpl.com
Reply
09-28-2014, 06:58 AM,
#10
RE: HVOF machine
Hi Michael, FST has sold about 12 units, installed around the world, undergoing field trials, and production applications.

Terry Wilmert <t.wilmert@fstincusa.com> is the lead contact on this in the USA.
Reply
09-29-2014, 07:32 PM,
#11
RE: HVOF machine
Hi Michael
I agree with Stephen, we need more notices in order to recommend an HVOF System, there are very expensive systems, but with very low reliability, like Sulzer systems, the simplest and affordable systems could be a HVOFW, or the one indicated by Manish, this for The Beginning
Reply
08-31-2015, 03:15 PM,
#12
RE: HVOF machine
(08-26-2014, 08:05 PM)michael86 Wrote: Hi guys,

does anybody have experience with HVOF system eGun? I am looking for some reliable HVOF system. What HVOF system you can recommend me?

Hi, if you are interesting for eGun system, just visit https://www.fst.nl/products/systems/hvof...vof-system of contact FST info@fst.nl

I'm R&D responsible for eGun development, but I'm wiling to hepl or support but only using offical way.

Thank you very much for your understanding.

Best regards,
Frantisek
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  WHAT IS THE SPECIFICATION FOR HVOF MACHINE ir_minja 9 12,401 11-11-2009, 10:53 PM
Last Post: djewell



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd