HVOF coating over Induction Hardened surface
01-30-2015, 07:52 AM,
#1
HVOF coating over Induction Hardened surface
Hi All

Is it recommendable to do H.V.O.F. coating using std WCCo powder over an Induction hardened surface?

Surface hardness is 60 HRC; but with suitable size abrasive, we are being able to generate a very decent surface roughness of 10 microns Ra

Coating shall need to be ground to 0.3 microns -

Thoughts and suggestion?

Shantanu
Reply
01-30-2015, 08:17 PM,
#2
RE: HVOF coating over Induction Hardened surface
I don't think it is a good idea to spray HVOF on this surface. 10 microns is not a lot of roughness for the coating to hold.
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
Lightning WC10Co4Cr HVOF coating leaves some lumps on the surface tobjung 1 915 10-17-2023, 07:32 AM
Last Post: Vadim Verlotski
  Surface corrosion when HVOF spraying vcduramais 4 2,533 08-20-2021, 11:25 AM
Last Post: vcduramais
  surface speed for HVOF coating process gito 8 6,251 05-03-2019, 01:08 PM
Last Post: Lemster68
  Coating for cyclone internal surface Arturas 0 2,175 12-11-2018, 06:58 AM
Last Post: Arturas
  Remove HVOF Coating in airfoil surface blade achmadarifudinh 5 4,323 07-20-2018, 10:51 AM
Last Post: achmadarifudinh
  Coating surface roughness William 9 27,618 12-26-2017, 10:40 AM
Last Post: Vadim Verlotski
  Powder Coating for Surface Table achmadarifudinh 3 4,096 11-28-2017, 12:19 PM
Last Post: Artyom
  Un-common surface pattern on coating failure shantanu 2 4,081 10-06-2016, 02:55 PM
Last Post: Vig
  Boron Carbide as a Surface Coating TCHP222 0 4,139 11-12-2015, 08:06 PM
Last Post: TCHP222
  Metco 450 coating surface problem Yaakov 2 7,113 05-06-2015, 01:54 PM
Last Post: loriolo
Rolleyes Discontinuities on HVOF surface Gabriel AM 3 5,250 05-29-2014, 08:22 PM
Last Post: KevinS
  Surface contact stress limit over an HVOF coating HVoilF 1 5,477 05-22-2013, 02:07 PM
Last Post: djewell
  What is the Correct Test Method for Case Hardened Steel dunlaw 7 57,959 10-27-2012, 12:55 AM
Last Post: Gordon
  Surface Speeds and traverse for coating Cro-167 js2know 2 8,449 12-23-2011, 02:15 PM
Last Post: Gordon
  Surface prep issues before APS coating msiranni 6 8,041 06-21-2011, 12:56 PM
Last Post: Justin



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd