HVOF: Gas fired system Vs liquid fired system
06-01-2012, 06:54 PM,
#1
HVOF: Gas fired system Vs liquid fired system
Dear all,

A very basic question, but not many answers recd from the best in the business till date.

If we had to chose between a gas fuel HVOF system Vs a liquid fuel one, what crieteria should one keep in mind before choosing one over the other.

The coating difference between the two is marginal; probably as much as may arise from different powder lots....if we are essentially spraying large parts then the extra local heating caused by the LF system does not pose a problem.

Then is it safe to say that it's an either/ or case, or is one system superior to the other? Please help me understand few criterias which you all must have considered prior to selecting one over the other; considering that spraying is done by a robot and that there is equal availability of liquid fuel and gases reqd....

Regards

Shantanu Newar
Reply
06-01-2012, 07:56 PM,
#2
RE: HVOF: Gas fired system Vs liquid fired system
Do you have to spray HVOF? You can achieve the same or better coating quality with HVAF plus you can spray at a faster production rate and lower operating cost. HVAF systems do not require large oxygen storage tanks or water chillers.
Reply
06-02-2012, 12:55 PM,
#3
RE: HVOF: Gas fired system Vs liquid fired system


Liquid Fuel Typical Advantages
  1. Thicker Carbide coatings
  2. Higher Spray Rates
  3. No Fuel Gases


Gas Fuel Advantages
  1. typically better Deposition Efficiencies
Reply
06-19-2012, 04:06 PM,
#4
RE: HVOF: Gas fired system Vs liquid fired system
We have and use both types, we have a JP500, and a couple of MEC microjets. The microjets are far more effeciant for smaller areas, with vastly less heat input as well. They also have the advantage of being very close to maintainance free. The jp is still king for larger areas at the moment, although we do have plans that may change this.

Quite honestly if you are spraying thick coating on big areas, then i would go liquid fuel, if youre looking to do more intricate parts, then i would go with a smaller gas fuelled gun.

Pete
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  Buy a plasma system kaizmoto1489 0 544 06-07-2021, 04:34 AM
Last Post: kaizmoto1489
  Plasma System Inquire Chever.Cai 0 1,048 06-20-2019, 06:13 AM
Last Post: Chever.Cai
  Want consumables for Metco 16E combustion wire system. Turbo Machinery 0 1,108 06-07-2019, 12:11 PM
Last Post: Turbo Machinery
  Twin Arc spray system ( request for your recommendation) demionkrishan 0 1,044 03-04-2019, 10:22 PM
Last Post: demionkrishan
  HVOF System Considerations Josgates 5 1,993 07-10-2018, 03:01 PM
Last Post: Stephen Booth
  Coating on Boiler tube in Coal Fired Power Plan by using Tafa wire 97MXC Iwan Sedaryawan CA 4 4,688 04-21-2017, 03:17 PM
Last Post: J!m
  The best HVOF system for MCrAlY DMack 12 8,613 01-21-2017, 04:54 AM
Last Post: david.wang
  Is it possible to spray powder established for gas based HVOF in Fluid HVOF system?? sreenuvundela 0 2,695 04-18-2016, 07:52 AM
Last Post: sreenuvundela
  Distilled vs Deionized water in gun cooling system Max K 3 4,303 07-27-2015, 11:21 AM
Last Post: adam wintle
  INFO ON ROKIDE SPRAY SYSTEM ehasan 11 20,633 07-10-2015, 07:39 AM
Last Post: shantanu
  turbine rotor gland seal system, Stephen Booth 1 3,627 06-20-2015, 06:47 PM
Last Post: Johnny_Blaze
  Miller Thermal Plasma spray system Vijay Deshpande 2 4,709 06-20-2015, 06:19 PM
Last Post: Johnny_Blaze
  Liquid fuel hvof testing Parat Tech 0 2,463 05-19-2015, 10:50 AM
Last Post: Parat Tech
  JP8000 vs DJ2600 system hustzc 1 3,382 04-09-2015, 07:41 PM
Last Post: djewell
  DJ 2700 System Water cooled RV_DMG 3 4,534 03-14-2015, 05:05 AM
Last Post: Stephen Booth



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd