Frequency of spraying the test sample
12-11-2012, 03:50 AM,
#1
Question  Frequency of spraying the test sample
Hello ,Everyone

GE Standard Practice Manual guideline denotes that based on acceptable statistical process control(SPC) system, the frequency of metallographic or other testing may be reduced.

Does this applicable to equipment /operator qualification / re-qualificatio or for the production quality control test samples?

How do you spray the test samples in daily production?

Regards!
Reply
12-11-2012, 10:43 PM,
#2
RE: Frequency of spraying the test sample
Test samples are done with every single part processed with GE spm.
For other OEM's are not as strict and monthy samples are possible.
If you have a history of 100% success rate on test samples over a period of time. I would contact GE support and ask for their opinion on reduced testing frequency.
For critical parts I would follow the GE spm and do it with every part.
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  Sample Failure demionkrishan 3 3,326 04-05-2018, 05:57 PM
Last Post: ThePlummer54
  sample polishing question WC Co CHI3 4 7,060 02-10-2014, 09:06 PM
Last Post: KevinS
  Amdry960+Metco73FNS-1 Sample issue joanwang 1 4,922 06-23-2008, 01:37 PM
Last Post: TurbineRepair
  radio frequency shielding by Zn and Al basakglkn 2 3,943 03-13-2008, 05:54 PM
Last Post: Vijay Deshpande



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd