Flexicord vs Powder for flame spray
10-09-2018, 09:49 AM,
Flexicord vs Powder for flame spray
Anyone has experienced both methods of flame spraying? Any benefits of one over the other. Flexicord wires seem to be practical in theory but not sure in practice. Is there a difference in efficiency, running costs, coating quality etc.

10-16-2018, 03:52 AM,
RE: Flexicord vs Powder for flame spray
in our experience, flexicord wires are often will have formulas that have very specific properites, like the Spinel minerals. Also usually the same equipment can be used for ceramic rod spraying.

If you do not have these specifications, then probably no reason to choose the flexicord, the product is more expensive compared to powder.

Also, you might consider HVOF or HVAF depending on your application

Possibly Related Threads…
Thread Author Replies Views Last Post
  Flame spray equipment for sale mgbaca1a 3 2,352 10-28-2020, 09:29 PM
Last Post: Flamm
  Metco Flame Spray Equipment For Sale dcparise 0 1,492 05-24-2020, 01:40 AM
Last Post: dcparise
  Flame Spray "Sulzer Metco 6P-II" Unit for Sale Boyut_Industries 0 2,293 11-16-2018, 12:34 PM
Last Post: Boyut_Industries
  Arc Spray / Flame spray Equipment Suppliers pcdmt 6 2,805 10-08-2018, 09:48 PM
Last Post: pcdmt
Bell Ni-Al (80/20) Flame Spray Wire Manish Choudhary 4 4,845 07-06-2015, 12:04 PM
Last Post: Manish Choudhary
  Wire Flame Spray Gun & Spare Parts Parat Tech 0 3,028 10-14-2014, 07:36 AM
Last Post: Parat Tech
  Flame spray coating equipment Jaydev 0 3,272 10-23-2013, 10:19 AM
Last Post: Jaydev
  Antique flame spray gun Byron 3 8,315 06-30-2012, 08:57 AM
Last Post: flame
  FP 73 Powder Flame Spray Gun Stephen Booth 2 5,757 05-09-2011, 01:40 PM
Last Post: Stephen Booth
  Metco flame spray outfit for sale Gordon 2 9,633 03-19-2011, 06:49 PM
Last Post: Gordon
  I need a flame spray gun jamaicanarchie 2 6,840 07-11-2009, 11:48 AM
Last Post: plasmajet1990
  Flame Spray Equipment jeff_ice 0 7,025 06-10-2009, 02:16 PM
Last Post: jeff_ice
  Bonding for wire flame spray Ni 20Al dia 1/8" / 3.2 mm iwan-sedaryawan 2 7,050 08-22-2008, 12:42 PM
Last Post: iwan-sedaryawan
  how much is a metco flame spray worth? akendrick57 5 16,935 07-24-2008, 02:32 PM
Last Post: Gordon
  Metco flame spray model question cool-engineer 6 16,421 10-10-2007, 09:16 PM
Last Post: randiq1956

Users browsing this thread: 1 Guest(s)

Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd