F4 nozzles 6 mm and 8 mm. Application differences
10-16-2020, 09:37 AM,
#1
F4 nozzles 6 mm and 8 mm. Application differences
Hi everyone.

We usually use a 6 mm nozzle for F4. A nozzle with a diameter of 8 mm was obtained for the sample.

There was a question about using a nozzle with a diameter of 8 mm. For what applications is the 8mm nozzle in general? Maybe for some special materials? And in general, what are the features when using this nozzle? What is the application difference between 6 and 8 mm nozzles?

Grateful for any information.
Reply
10-16-2020, 03:57 PM,
#2
RE: F4 nozzles 6 mm and 8 mm. Application differences
The larger the nozzle diameter, the lower the speed and the higher the temperature of the particles. Thus, the 8mm nozzle is more suitable for powders with a high melting point and large particle size.
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  HA porous coating for medical application nizamab 4 958 01-11-2019, 01:58 PM
Last Post: Lemster68
  Sealer application on TSA Massey 8 13,956 10-10-2016, 09:25 AM
Last Post: LouisRichter
  Coating solution needed for slurry pump application Killswitch 11 8,601 02-19-2015, 02:57 AM
Last Post: Axis Machine
  Non Loading Nozzles RV_DMG 1 1,893 08-16-2014, 02:54 PM
Last Post: Gordon
Question problem about powder paint application over Zn metalizing basakglkn 8 13,772 05-23-2012, 08:21 AM
Last Post: Jaydev
Sad different nozzles of a spray gun can be used for the same coatings? fhyuan 2 4,121 05-18-2008, 10:29 PM
Last Post: hvofhamid
  Original nozzles vs. self-made nozzles powerman 7 6,652 05-11-2008, 05:17 PM
Last Post: hvofhamid



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd